Lumenfacade Color Changing
Linear LED luminaire for grazing and floodlighting
The Lumenfacade Colour Changing is a high-performance linear LED luminaire designed for grazing or floodlighting exterior facades with colour. This luminaire is available in 12 in, 24 in, 36 in or 48 in sections, and offers a wide number of options, including: a choice of optics for grazing or floodlighting; RGB, RGBW, or RGBA colour mixing; various mounting options, finishes, accessories and controls; as well as Legacy or Custom output modes.
Downloads
Documents (0)
0.00/250 MBProduct Configurator
Your Product Code
LOG __ __ __ __ __ __ __
Housing 1
Length
Color and Color Temperature
Optic
Mounting Options
Finish
Option
Buy America.n Act
- 1 Power consumption is typically 20% higher for 12 in fixture lengths.
- 2 347 volts available, consult factory for details.
- 3 To connect 12 in fixture lengths to the Lumentalk system, DMX/RDM must be specified as the control option, and a Lumentalk Data Bridge (LDB-DMX) is required. See the typical wiring diagrams in the specification sheet for details.
- 4 2700K, 3500K and Royal Blue available, consult factory. Longer lead times apply.
- 5 For best results, we recommend a 6 in setback from surface. Contact factory for application support.
- 6 Suitable to use when 3GV option is specified.
- 7 Lumenpulse offers a wide selection of RAL CLASSIC (K7) colors with a smooth texture and high-gloss finish. Please consult factory for a list of available K7 colors, other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 8 Setup charges apply for RAL colors. Consult factory for details.
- 9 Longer lead times can be expected for custom RAL color finishes.
- 10 Available for 24 in, 36 in and 48 in fixture lengths only.
- 11 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 12 A control box (CBX) and LumenID (LID) must be specified.
- 13 DALI 2 T8 controller required, provided by others. DALI2 T8 control uses a single DALI short address.
- 14 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 15 Setup charges apply. Consult factory for details.
- 16 Available with UMP and UMAS mounting options only.
- 17 Consult European specification sheet and installation instructions for CE wiring information.
- 18 Not available with CE certification option.
- 19 Contact your Lumenpulse Sales Representative for more information on order volume details.
Testimonials
The Lumenpulse products out-performed its competitors in every aspect with the total package of performance, reach, cost, accessibility, adjustability, maintenance, and fixture look and design.
Sara Schonour
Cannon Design