Lumenfacade Max Continuous Horizontal Dynamic White
Dynamic warm white
Dynamic white
Agregar a su Selección:
Luminaria LED lineal para luz rasante y de proyección.
La Lumenfacade Max Dynamic White presenta tecnologías nunca antes vistas y es la primera luminaria lineal del mundo que incorpora Opticolor™, la revolucionaria tecnología patentada de mezcla en la fuente de Lumenpulse. Disponible en tres gamas de temperatura de color, así como la opción Dim to Warm de Lumenpulse, la Lumenpulse Max Dynamic White le permite la variabilidad necesaria para adaptar cada proyecto a su visión.
Características Expandir todo unfold_more Contraer todo unfold_less
Descargas
Documentos (0)
0.00/250 MB
Configurador de productos
Su código de producto
LFM CR __ __ __ __ __ __ __ __ __ __ __ XD __ __
Carcasa
Voltaje
Color y temperatura de color
Óptica
Lado de alimentación
Control
Vibration Rating 26
Opción de montaje 31
WMi1 - Wall Mounting Incrementally Adjustable by 6˚, 1.5 plg to Optical Center (180˚ Pivot Limit) 34
WMi3 - Wall Mounting Incrementally Adjustable by 6˚, 3.5 plg to Optical Center (130˚ Pivot Limit) 34
WMi3 - Wall Mounting Incrementally Adjustable by 6˚, 3.5 plg to Optical Center (140˚ Pivot Limit) 34
WMi12 - Wall Mounting Incrementally Adjustable by 6˚, 12 plg to Optical Center (180˚ Pivot Limit) 37
Environment
Acabado
Accesorios 42 43(0/2)
Buy America.n Act
Nota
- 1 Available for 120_277 voltage option only.
- 2 Available for 230 voltage option only.
- 3 Available for the Japanese market only.
- 4 Available for 100_200V voltage option only.
- 5 Consult your local Sales Representative for PSE certification.
- 6 Available for UL certification only.
- 7 Available for CE certification only.
- 8 Available for PSE Certification only.
- 9 Consult factory for applications with 12 plg fixtures.
- 10 Consult factory for applications with PSE Certification.
- 11 Available with DALIT8, LT and DMX/RDM control options.
- 12 Available with LT, DMX/RDM and DIM control options.
- 13 For best results use a miminum 6 plg setback from surface. Contact factory for application support.
- 14 Can be combined with a CL or FR lens only.
- 15 Can be combined with a HFR or FR lens only.
- 16 When CL lens is combined with NAS or CAS optic, LF or RF feeding side must be specified.
- 17 When HFR lens is specified, LF or RF feeding side must be specified.
- 18 When FR lens is combined with WW, NAS or CAS optic, LF or RF feeding side must be specified.
- 19 DALI 2 T8 controller required, provided by others. DALI2 T8 control uses a single DALI short address.
- 20 Un Lumentranslator 2 y LumentalkID deben ser incluidos en todas las aplicaciones con Lumentalk. Consulte las páginas de Lumentranslator 2 y Lumentalk, y sus fichas de especificaciones técnicas, para mayores detalles.
- 21 Minimum dimming value is less than 1%.
- 22 A Control Box (CBX) and LumenID (LID) must be specified.
- 23 Available for MDTW color temperature option only.
- 24 An Ethernet CBX is required. Refer to the ETX configuration in the Ethernet CBX Specification Sheet for details.
- 25 ETX Control Option is not compatible with LFTJ T-Junction Accessory.
- 26 Consult factory for vibration rating requirements on vertical installations.
- 27 Available for all mounting options.
- 28 Available for FX, WMC1, WMi1, WMC3 and WMi3 mounting options when combined with VRN vibration rating. All other mounting options may have installation limitations, and a review is needed for approval. Consult factory.
- 29 Consult factory for pole mounting accessories.
- 30 Available for FX, WMi1, and WMi3 mounting options when combined with VRBO vibration rating. All other mounting options may have installation limitations, and a review is needed for approval. Consult factory.
- 31 Un soporte de montaje por luminaria de 1 pies. Dos soportes de montaje por luminaria de 2 pies, 3 pies y 4 pies.
- 32 Available with NVR vibration rating only. Installation limitations may apply for other vibration rating options, and a review is needed for approval. Consult factory.
- 33 Not suitable for bridge and overpass applications.
- 34 Vibration tested in accordance with ANSI 136.31 2018 at 3Gv.
- 35 Vibration tested in accordance with ANSI 136.31 2018 at 1.5Gv.
- 36 Vibration tested in accordance with ANSI 136.31 2018 at 2.3Gv.
- 37 Vibration tested in accordance with ANSI 136.31 2018 at 4.6Gv.
- 38 Zirconium pretreatment completed with corrosion-resistant primer and electrostatically-applied powder coat paint finish.
- 39 Lumenpulse ofrece una vasta selección de colores RAL CLASSIC (K7) con una suave textura y acabado brillante. Consulte nuestra fábrica acerca de los colores K7 disponibles, otras texturas y brillos RAL o para replicar otras paletas de color. Los colores resultantes de este proceso pueden variar.
- 40 Setup charges apply for RAL colors. Consult factory for details.
- 41 Longer lead times can be expected for custom RAL color finishes.
- 42 SH accessory can be combined with LV, LVAS or VS accessories. All other combinations are not possible.
- 43 The exterior finish of the accessory will match the finish specified in the fixture order code (interior surface painted matte black).
- 44 Available for 10x10, 10x30, 10x60, 10x90, 30x30, 30x60, 30x90, 60x60, 90x90, 30x10, 60x10, 60x30, 90x10 and W optics only.
- 45 Not suitable for bridge and overpass applications. The Shield can be installed in zones with wind speeds up to 120 mph. Consult factory for zones with wind speeds higher than 120 mph.
- 46 Contact your Lumenpulse Sales Representative for more information on order volume details.
Aplicaciones relacionadas
Productos relacionados
-
Lumenfacade Max Continuous Run
New Options -
Lumenfacade Max Continuous Run Color Changing
New Options -
Lumenfacade Max Continuous Horizontal
New Options -
Lumenfacade Max Continuous Horizontal Dynamic White
New Options -
Lumenfacade Max Continuous Horizontal Color Changing
New Options -
Lumenfacade Max Standalone
New Options -
Lumenfacade Max Standalone Dynamic White
New Options -
Lumenfacade Max Standalone Color Changing
New Options