Lumenfacade Pure Continuous Run
Add to your Selection:
Linear LED Luminaire for Grazing, Floodlighting, and Wallwashing
The Lumenfacade Pure Continuous Run is the purest expression of Lumenpulse form, design, quality, and performance. Designed from the inside out to be a cutting-edge expression of Lumenpulse quality, the Lumenfacade Pure possesses simplified control options, integrated accessories, and cohesive mounting options. Rethink everything you've thought about white light; think Lumenpulse.
Options Expand All unfold_more Collapse All unfold_less
8° x 8°
10° x 10°
10° x 30°
10° x 60°
10° x 90°
30° x 30°
30° x 60°
30° x 90°
60° x 60°
90° x 90°
30° x 10°
60° x 10°
60° x 30°
90° x 10°
Wide 120° (cove distribution type)
Narrow Asymmetric
Asymmetric Wallwash
Ceiling Asymmetric
Black Sandtex®
Bronze Sandtex®
Silver Sandtex®
Smooth White
Textured Black
Textured Bronze Non-Metallic
Textured Medium Gray
Textured Green
Textured White
Custom Color and Finish (Please Specify RAL Color)
Downloads
Documents (0)
0.00/250 MBBrochures
Product GuidePDFdownloadadd
Presentation Cards - InteractiveInstallation Instructions
Installation InstructionsPDFdownloadadd
Certifications
CE Declaration of ConformityPDFdownloadadd
Product Configurator
Your Product Code
LFP CR CE 120_277 __ __ __ 80 __ __ __ __ __ __ XD __ __
Housing
Certification
Color Rendering
Optic
Vibration Rating 11
Mounting Options 18
Environment
Finish
Notes
- 1 Consult factory for CRI 90+.
- 2 For best results use a miminum 3 in setback from surface. Contact factory for application support.
- 3 Can be combined with a CL or FR lens only.
- 4 No feed information required.
- 5 Can be combined with a HFR or FR lens only.
- 6 When CL lens is combined with CAS optic, LF or RF feeding side must be specified.
- 7 When HFR lens is specified, LF or RF feeding side must be specified.
- 8 When FR lens is combined with WW, NAS or CAS optic, LF or RF feeding side must be specified.
- 9 Minimum dimming value is less than 1%.
- 10 DALI 2 T6 controller required, provided by others.
- 11 Consult factory for vibration rating requirements on vertical installations.
- 12 Available for all mounting options.
- 13 Available for FX, WMC1, WMi1, WMC3 and WMi3 mounting options when combined with VRN vibration rating. All other mounting options may have installation limitations, and a review is needed for approval. Consult factory.
- 14 Specify only if a normal application is required as per ANSI 136.31 2018.
- 15 Consult factory for pole mounting accessories.
- 16 Available for FX, WMi1, and WMi3 mounting options when combined with VRBO vibration rating. All other mounting options may have installation limitations, and a review is needed for approval. Consult factory.
- 17 Specify only if a bridge or overpass application is required as per ANSI 136.31 2018.
- 18 Two mounting brackets provided for each fixture length.
- 19 Vibration tested in accordance with ANSI 136.31 2018 at 3Gv.
- 20 Available with NVR vibration rating only. Installation limitations may apply for other vibration rating options, and a review is needed for approval. Consult factory.
- 21 Not suitable for bridge and overpass applications.
- 22 Vibration tested in accordance with ANSI 136.31 2018 at 1.5Gv.
- 23 Vibration tested in accordance with ANSI 136.31 2018 at 2.3Gv.
- 24 Vibration tested in accordance with ANSI 136.31 2018 at 4.6Gv.
- 25 Zirconium pretreatment completed with corrosion-resistant primer and electrostatically-applied powder coat paint finish.
- 26 For natatorium or full salt spray applications, consult factory.
- 27 Lumenpulse offers a wide selection of RAL CLASSIC (K7) colors with a smooth texture and high-gloss finish. Please consult factory for a list of available K7 colors, other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 28 Setup charges apply for RAL colors. Consult factory for details.
- 29 Longer lead times can be expected for custom RAL color finishes.
- 30 SH accessory can be combined with LV, LVAS or VS accessories. All other combinations are not possible.
- 31 The exterior finish of the accessory will match the finish specified in the fixture order code (interior surface painted matte black).
- 32 Available for 8x8, 10x10, 10x30, 10x60, 10x90, 30x30, 30x60, 30x90, 60x60, 90x90, 30x10, 60x10, 60x30, 90x10 and W optics only.
- 33 Not suitable for bridge and overpass applications. The Shield can be installed in zones with wind speeds up to 120 mph. Consult factory for zones with wind speeds higher than 120 mph.