Lumenfacade Pure Continuous Run
Agregar a su Selección:
Luminaria lineal LED para iluminación rasante, bañada por agua y bañada de paredes
El Lumenfacade Pure Continuous Run es la expresión más pura de la forma, el diseño, la calidad y el rendimiento de Lumenpulse. Diseñado de adentro hacia afuera para ser una expresión de vanguardia de la calidad de Lumenpulse, el Lumenfacade Pure posee opciones de control simplificadas, accesorios integrados y opciones de montaje cohesivas. Reconsidera todo lo que has pensado sobre la luz blanca; piensa en Lumenpulse.
Descargas
Documentos (0)
0.00/250 MBFolletos
Product GuidePDFdownloadadd
Presentation Cards - InteractiveInstrucciones de instalación
Installation InstructionsPDFdownloadadd
Certificados
UL Certificate of CompliancePDFdownloadadd
Configurador de productos
Su código de producto
LFP CR __ __ __ __ __ 80 __ __ __ __ __ __ XD __ __
Carcasa
Reproducción de colores
Óptica
Lado de alimentación
Control
Vibration Rating 18
Opción de montaje 25
WMi12 - Wall Mounting Incrementally Adjustable by 6˚, 305 mm to Optical Center (180˚ Pivot Limit) 31
Environment
Acabado
Accesorios 37 38(0/2)
Buy America.n Act
Nota
- 1 CE certification is available for 120_277 voltage option only.
- 2 Available for UL certification only.
- 3 Available for 610 mm, 914 mm and 1219 mm fixture lengths only.
- 4 Available for 3.75W wattage option when combined with 1219 mm lengths only.
- 5 3.75W Wattage option is suitable for ASHRAE Zone 3 requirement when operated on 120V and for Zone 4 when operated on 277V.
- 6 Consult factory for CRI 90+.
- 7 For best results use a miminum 76 mm setback from surface. Contact factory for application support.
- 8 Can be combined with a CL or FR lens only.
- 9 No feed information required.
- 10 Can be combined with a HFR or FR lens only.
- 11 When CL lens is combined with CAS optic, LF or RF feeding side must be specified.
- 12 When HFR lens is specified, LF or RF feeding side must be specified.
- 13 When FR lens is combined with WW, NAS or CAS optic, LF or RF feeding side must be specified.
- 14 Minimum dimming value is less than 1%.
- 15 DALI 2 T6 controller required, provided by others.
- 16 Available for 120V voltage option only.
- 17 PH contol option is ELV and TRIAC.
- 18 Consult factory for vibration rating requirements on vertical installations.
- 19 Available for all mounting options.
- 20 Available for FX, WMC1, WMi1, WMC3 and WMi3 mounting options when combined with VRN vibration rating. All other mounting options may have installation limitations, and a review is needed for approval. Consult factory.
- 21 Specify only if a normal application is required as per ANSI 136.31 2018.
- 22 Consult factory for pole mounting accessories.
- 23 Available for FX, WMi1, and WMi3 mounting options when combined with VRBO vibration rating. All other mounting options may have installation limitations, and a review is needed for approval. Consult factory.
- 24 Specify only if a bridge or overpass application is required as per ANSI 136.31 2018.
- 25 One mounting bracket provided for 303 mm fixtures. Two mounting brackets provided for 608 mm, 913 mm and 1218 mm fixtures.
- 26 Vibration tested in accordance with ANSI 136.31 2018 at 3Gv.
- 27 Available with NVR vibration rating only. Installation limitations may apply for other vibration rating options, and a review is needed for approval. Consult factory.
- 28 Not suitable for bridge and overpass applications.
- 29 Vibration tested in accordance with ANSI 136.31 2018 at 1.5Gv.
- 30 Vibration tested in accordance with ANSI 136.31 2018 at 2.3Gv.
- 31 Vibration tested in accordance with ANSI 136.31 2018 at 4.6Gv.
- 32 Zirconium pretreatment completed with corrosion-resistant primer and electrostatically-applied powder coat paint finish.
- 33 For natatorium or full salt spray applications, consult factory.
- 34 Lumenpulse ofrece una vasta selección de colores RAL CLASSIC (K7) con una suave textura y acabado brillante. Consulte nuestra fábrica acerca de los colores K7 disponibles, otras texturas y brillos RAL o para replicar otras paletas de color. Los colores resultantes de este proceso pueden variar.
- 35 Setup charges apply for RAL colors. Consult factory for details.
- 36 Longer lead times can be expected for custom RAL color finishes.
- 37 SH accessory can be combined with LV, LVAS or VS accessories. All other combinations are not possible.
- 38 The exterior finish of the accessory will match the finish specified in the fixture order code (interior surface painted matte black).
- 39 Available for 8x8, 10x10, 10x30, 10x60, 10x90, 30x30, 30x60, 30x90, 60x60, 90x90, 30x10, 60x10, 60x30, 90x10 and W optics only.
- 40 Not suitable for bridge and overpass applications. The Shield can be installed in zones with wind speeds up to 193 km/h. Consult factory for zones with wind speeds higher than 193 km/h.
- 41 Not available with CE certification option.
- 42 Contact your Lumenpulse Sales Representative for more information on order volume details.