Lumenbeam Medium Pendant Color Changing
Add to your Selection:
Color-Changing LED Pendant for Landscapes and Architecture
The Lumenbeam Medium Pendant Colour Changing is an IP66-rated suspended luminaire luminaire for lighting landscapes and architectural details. The system offers numerous options including optics for flood or accent lighting, a choice of colour mixing, as well as various accessories, spread lenses, and controls. The luminaire also has an anti-corrosion option for use in harsh, chemical, or coastal environments.
Downloads
Documents (0)
0.00/250 MB
Product Configurator
Your Product Code
LBMP __ __ __ __ __ __ __ __
Color and Color Temperature
Optic
Optical Option 12 13
Finish
Buy America.n Act
Notes
- 1 Consult factory for availability of other color options such as Royal Blue.
- 2 Not available for VN, NAS and WW optics.
- 3 MRGBWP can be configured to MRGB via RDM, consult factory for more details.
- 4 Consult factory for the availability of more color and CCT options (e.g. royal blue).
- 5 Fixtures are shipped from the factory in Optidrive™ Mode. Normal Mode can be activated onsite for DMX/RDM and LT fixtures. For DMX/RDM applications, Optidrive Mode requires a LumenID, LumenID software and onsite commissioning. For LT applications, Optidrive Mode requires a LumentalkID, LumentalkID software and onsite commissioning. Additionally, with Opticolor+™ the white CCT is configurable in the field from 1800K-8000K.
- 6 Consult factory for DALIT8 applications with MRGBWP and a CCT other than 3000K.
- 7 Factory installed, not interchangeable on site.
- 8 Not available with MRGBA and MRGBWP color temperature options.
- 9 Available with MRGBA and MRGBWP color temperature options only.
- 10 Cannot be combined with other optics.
- 11 Consult factory for custom stem lengths.
- 12 Optical options are factory installed and cannot be changed in the field.
- 13 Not available with WFL, VWFL, NAS and WW optics.
- 14 Field adjustable spread lens optical accessory available, order separately.
- 15 Lumenpulse offers a wide selection of RAL CLASSIC (K7) colors with a smooth texture and high-gloss finish. Please consult factory for a list of available K7 colors, other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 16 Setup charges apply for RAL colors. Consult factory for details.
- 17 Longer lead times can be expected for custom RAL color finishes.
- 18 For RGB, RGBW30K, RGBW40K and RGBA applications, a Lumentalk system is enabled with LDB-DMX accessory, DMX/RDM must be specified in the order code. See the typical wiring diagrams in the specification sheet for details.
- 19 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 20 Not available with CEII certification option.
- 21 A control box (CBX) and LumenID (LID) must be specified.
- 22 DALI 2 T8 controller required, provided by others. DALI2 T8 control uses a single DALI short address.
- 23 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 24 Setup charges apply. Consult factory for details.
- 25 Consult European specification sheets and installation instructions for CE and CE Class II wiring information.
- 26 Not available with CE or CEII certification options.
- 27 Contact your Lumenpulse Sales Representative for more information on order volume details.
Related Applications
Related Products
-
Lumenbeam Small
New Options -
Lumenbeam Small Dynamic White
New Options -
Lumenbeam Small Color Changing
New Options -
Lumenbeam Medium
New Options -
Lumenbeam Medium Dynamic White
New Options -
Lumenbeam Medium Color Changing
New Options -
Lumenbeam Medium Pendant
New Options -
Lumenbeam Medium Pendant Dynamic White
New Options