Lumencore Recessed Discreet Medium
High-performance LED downlight for a sleek, minimalist look
The Lumencore Recessed Discreet Medium achieves a sleek, trimless appearance without the cost and complexity of plastering in small luminaires. Designed with a deep-set soft reflector, the luminaire blends harmoniously into ceilings, making it ideal for commercial and residential applications looking for a clean, minimalist look. The luminaire offers wide a choice of outputs, beam angles, color temperatures, color rendering options and accessories.
Options Expand All unfold_more Collapse All unfold_less
On/Off Control
Standard 0-10V Dimming to 1% Linear Curve
Standard 0-10V Dimming 1% Linear
Standard 0-10V Dimming 1% Logarithmic
Pro 0-10V Dimming 0.1% Linear
Pro 0-10V Dimming 0.1% Logarithmic
Standard DALI Dimming 1% Linear
Standard DALI Dimming 1% Logarithmic
Pro DALI Dimming 0.1% Linear
Pro DALI Dimming 0.1% Logarithmic
DALI-2 Dimming Type 8 (Multi-Channel Capability)
DMX/RDM (Configurable to 1, 2, or 3 Channel Control via RDM in the Field)
Lutron® Hi-lume 1% EcoSystem® LDE1/PEQ1 Soft-on/Fade-to-Black
Lumentalk
Phase Dimming (Consult Factory)
Phase 1% Dimming
Softening Glass Lens
Honeycomb Louver
Concentric Ring Louver
Clear Glass Lens
Prismatic Diffuser
Linear Spread Lens Narrow (1° x 40°)
Linear Spread Lens Wide (1° x 60°)
2200K
2700K
3000K
3500K
4000K
Dim to Warm (2700K to 2200K)
Dim to Warm Plus (3500K to 1800K)
Dynamic White (2700K to 6500K)
Dynamic Warm White (2200K to 3000K)
Dynamic Warm White Plus (2200K to 3500K)
Extra Narrow Spot 5°
Very Narrow Spot 10°
Narrow Spot 15°
Narrow 25°
Narrow Faceted Reflector 25°
Medium 40°
Medium Faceted Reflector 40°
Wide 60°
Wide Faceted Reflector 60°
Downloads
Documents (0)
0.00/250 MBSpecification Sheets
Complete Specsheet - ImperialPDF 4.37 Mdownloadadd
Brochures
Point Source CataloguePDFdownloadadd
Installation Instructions
Installation Instructions - Bodine Emergency BatteryPDFdownloadadd- Installation Instructions - Iota Emergency BatteryPDFdownloadadd
Minimum Ceiling Height Reference GuidePDFdownloadadd- Installation Instructions (RM installation type)PDFdownloadadd
- Installation Instructions (IC installation type)PDFdownloadadd
- Installation Instructions (NC installation type)PDFdownloadadd
Product Configurator
Your Product Code
LADM A __ __ __ __ __ RD __ __ __ __
Certification
Color and Color Temperature
Color Rendering
Optics (Nominal Distribution)
Trim Shape
Control 18
Installation Type
Option
- 1 Refer to website product configurator for all exceptions.
- 2 Consult factory for 347 volts.
- 3 Available for VN, NS, N, NFR, M, MFR, W and WFR optics only.
- 4 Available for NS, N, NFR, M, MFR, W and WFR optics only.
- 5 Available for NFR, M, MFR, W and WFR optics only.
- 6 Available for CR80 only.
- 7 Not available for XN and VN optics.
- 8 Available for 1000, 1300 and 2000 lumens when combined with NFR, M, MFR, W and WFR optics only.
- 9 NFR, MFR and WFR faceted reflector optics are recommended for optimal performance.
- 10 Available with CR90 only.
- 11 Available for 1300 lumens when combined with CR80 and NFR, M, MFR, W or WFR optics only.
- 12 Available for 2200K, 2700K, 3000K, 3500K, 4000K and DWH, DWW or DWWP color options only.
- 13 CR95 and RCR95 available up to 1300 lumens for NS optic, up to 2000 lumens for N, NFR, M, MFR, W and WFR optics only.
- 14 Radiant CRI options available for 3000K only.
- 15 Available for 700 lumens when combined with CR80 or CR90 color rendering options only.
- 16 Available up to 2000 lumens.
- 17 Longer lead times can be expected for custom RAL color finishes.
- 18 Control options vary according to color temperature, color rendering, optics and installation type combination. Refer to website product configurator for details.
- 19 Manufacturer's choice driver. Order code may change to NO1.
- 20 Not available for DTW, DTWP, DWH, DWW or DWWP color options.
- 21 Manufacturer's choice driver. Order code may change to DAMC1 or DAMC2.
- 22 Available up to 3000 lumens when combined with CR80 or CR90 color rendering option. Available up to 2000 lumens when combined with CR80, CR90 or CR95 color rendering options.
- 23 Available for RM and NC installation types only.
- 24 Driver cuts off power to the fixture when the control signal drops below 0.5V.
- 25 Not available for DWH, DWW or DWWP color options.
- 26 Available for DTW and DTWP color options only, when combined with 1000, 1300 or 2000 lumens.
- 27 Consult factory for other DALI control options for static color temperatures.
- 28 Available for DWH, DWW and DWWP color options only. DALI-2 Type 8 controller required.
- 29 Consult factory for DALIT8 control option.
- 30 A Control Box (CBX-DS or CBX-ST) and lumenID (LID) must be specified.
- 31 Available for DTW, DTWP, DWH, DWW and DWWP color options only
- 32 One EcoSystem® address per fixture. 1% minimum dimming value. Lutron® EcoSystem® Enabled dimming available for RM and NC installation types only. Lutron® EcoSystem® Enabled dimming not available for 700 lumens or 1000 lumens.
- 33 1% minimum dimming value. Lumentalk dimming available for RM installation type when combined with 2200K, 2700K, 3000K, 3500K or 4000K color options and any of the optic options. Lumentalk dimming available for NC installation type when combined with 2200K, 2700K, 3000K, 3500K or 4000K color options and XN or VN optic options. Lumentalk is available for RM and NC installation types when combined with DTW, DTWP, DWH, DWW or DWWP color options and NFR, M, MFR, W or WFR optic options. Lumentalk dimming available up to 1300 lumens (CR80, RCR80, CR90, CR95 or RCR95), 2000 lumens (CR80, RCR80 or CR90).
- 34 Lumentalk is not available for emergency battery backup options.
- 35 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 36 Manufacturer's choice driver. Order code may change to PH1 or PH2.
- 37 Available for 120V only. Not available for IC and CP installation types.
- 38 Available for 2700K, 3000K, 3500K and 4000K color options when combined with XN or VN optics only.
- 39 Not available for emergency battery backup options.
- 40 Manufacturer's choice driver. Order code is subject to change.
- 41 Insulated ceiling available up to 1000 lumens (CR80, RCR80, CR90, CR95 or RCR95), 1300 lumens (CR80, RCR80 or CR90).
- 42 Insulated ceiling available for DTW or DTWP color options when combined with the DA1, DA2, SDALI1 or SDALI2 control options.
- 43 Emergency battery backup options require ceiling access for test button use. The battery will operate for 90 minutes minimum and maintain a minimum of 1 fc from a 7 ft 2 in height as per UL 924. For indoor use only in dry or damp locations.
- 44 Consult factory for use with LT or DMX/RDM control options combined with DTW or DTWP color options. Not available for XN and VN optics.
- 45 Emergency battery backup options are field installed and not presided by Lumenpulse. Refer to related installation instructions for details.
- 46 Consult factory for use with LT or DMX/RDM control options combined with DTW or DTWP color options or LT control combined with XN or VN optics.
- 47 Factory installed.
- 48 Maximum one accessory per fixture.
- 49 HL accessory is available for 2200K, 2700K, 3000K, 3500K and 4000K color options only.
- 50 Available for XN, VN and NS optics only.
- 51 Available for XN, VN, NS, N and NFR optics when combined with 2200K, 2700K, 3000K, 3500K, 4000K color options only. Available for NFR optic only when combined with DTW, DTWP, DWH, DWW or DWWP color options only.