Lumenblade Nano
Add to your Selection:
Minimalist LED for Outdoor Sites and Areas
The Lumenpulse Lumenblade Nano is an outdoor LED luminaire that uses a rectilinear version of the Lumencentro light engine to create a continuous line of light. Side Mount or Wall Mount options are available. Its seen-but-not-seen, minimalist design is sustainable, blends with both contemporary and heritage architectures, provides a high level of security, and is sensitive to the natural environment with DarkSky approval, low outputs, and with a BUG rating of 0.
Downloads
Documents (0)
0.00/250 MBBrochures
Brochure LumenbladePDFdownloadadd
Product Configurator
Your Product Code
BLDN __ __ __ __ __ __ __ DIM __
Housing
Output (Nominal Lumens) 9
Color and Color Temperature
Distributions
Optical Option
Finish
Control
Option
Mounting Adaptor
Notes
- 1 Available with all pole mounting options.
- 2 Available with W1H2, WIH4 and W1HSJB adaptors only.
- 3 When combined with CSL lens, only AMB color temperature is available.
- 4 Available with Type 2, 3 and 4 distributions only.
- 5 Standard IK06 rating for glass lens. IK10 rated polycarbonate lens available, please consult factory.
- 6 Not available with type 5 distribution.
- 7 Available with type 3 and 5 distributions only.
- 8 Available for N03, N05, N07 and N10 outputs only.
- 9 Lumen output will vary according to the lens and distribution specified for the fixture. Please consult the photometric information section of the specification sheet for more details.
- 10 Available with AMB color temperature only.
- 11 Not available for FSL and HFSL lens.
- 12 Available with N02 and XS03 outputs only.
- 13 Backlight shield distributions not available if combined with WM option.
- 14 Available for CRI 80 only.
- 15 Available for CRI 80 and CRI 90 only.
- 16 Not DarkSky Approved.
- 17 Available for CRI 70 and CRI 80 only.
- 18 Binning within a 3-step McAdam ellipse, with the exception of 5700K.
- 19 Binning within a 2-step MacAdam ellipse, with the exception of 2200K and 5700K.
- 20 Binning within a 2-step MacAdam ellipse.
- 21 Available with CSL and HFSL lenses only.
- 22 Factory installed.
- 23 Specify RAL number followed by “TX” for textured finish (ex: RAL9007TX) or STX for Sandtex finish (ex: RAL9007STX). Textured or Sandtex finishes are recommended for the durability of all products. If a finish is not specified with the RAL number (ex: RAL9007), a glossy finish will be provided. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 24 Longer lead times can be expected for custom RAL color finishes.
- 25 Setup charges apply for RAL colors. Consult factory for details.
- 26 DIM control can be used as NO (On/Off control) if no data is required.
- 27 Vibration tested in accordance with ANSI 136.31 2018 for bridge and overpass applications at 5Gv.
- 28 Specify only if a bridge or overpass application is required.
- 29 Not available for W1HSJB mounting adaptor.
- 30 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 31 Setup charges apply. Consult factory for details.
- 32 The WM-W1HSJB mounting is designed for installation on a round exterior (weatherproof) surface junction box (Ø4 in diameter and 1 5/8 in deep). For all other types of junction box, consult the factory.
- 33 Not available with VRBO option.
Related Applications
Related Products
-
Lumenblade Bollard
DarkSky Approved -
Lumenblade Column
DarkSky Approved -
Lumenblade Medium
DarkSky Approved -
Lumenblade Small
DarkSky Approved -
Lumenblade Small Wall Mount Horizontal
DarkSky Approved New -
Lumenblade Small Wall Mount Perpendicular
DarkSky Approved New -
Muffler Poles
-
Straight Poles