Lumenfacade Standalone Dynamic White
Tunable single unit linear LED luminaire
The Lumenfacade Stand Alone Dynamic White is a high-performance, linear LED luminaire for outdoor applications where individual units are preferred to continuous rows. The luminaire can be surface mounted for wall grazing or floodlighting, or can be suspended from ceilings for general lighting of large public spaces. A special feature allows the selection of any color temperature from 2200K to 3000K or 2700K to 6500K, allowing the ambience to be adjusted. Available in 12 in, 24 in, 36 in or 48 in sections, the luminaire is configurable with a number of options including: optics for grazing or flood lighting; various mounting options, finishes, accessories and controls. The Stand Alone Dynamic White is also available with a unique asymmetric wallwash distribution, providing exceptional uniformity and brightness for walls and signage.
Downloads
Documents (0)
0.00/250 MB
Product Configurator
Your Product Code
LOGP __ __ __ __ __ __ __ __
Length
Color and Color Temperature
Optic
Mounting Options
Finish
Control
- 1 Power consumption is typically 20% higher for 12 in fixture lengths.
- 2 347 volts available, consult factory for details.
- 3 To connect 12 in fixture lengths to the Lumentalk system, DMX/RDM must be specified as the control option, and a Lumentalk Data Bridge (LDB-DMX) is required. See the typical wiring diagrams in the specification sheet for details.
- 4 For best results, we recommend a 6 in setback from surface. Contact factory for application support.
- 5 Suitable to use when 3GV option is specified.
- 6 Lumenpulse offers a wide selection of RAL CLASSIC (K7) colors with a smooth texture and high-gloss finish. Please consult factory for a list of available K7 colors, other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 7 Setup charges apply for RAL colors. Consult factory for details.
- 8 Longer lead times can be expected for custom RAL color finishes.
- 9 Available for 24 in, 36 in and 48 in fixture lengths only.
- 10 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 11 Available for DWW color temperature option only.
- 12 A control box (CBX) and LumenID (LID) must be specified.
- 13 DALI 2 T8 controller required, provided by others. DALI2 T8 control uses a single DALI short address.
- 14 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 15 Setup charges apply. Consult factory for details.
- 16 Available with UMP and UMAS mounting options only.
- 17 Consult European specification sheet and installation instructions for CE wiring information.
Related Applications
Related Products
-
Lumenfacade
To be Replaced With Lumenfacade Max and Pure -
Lumenfacade Dynamic White
To be Replaced with Lumenfacade Max Dynamic White -
Lumenfacade Color Changing
To be Replaced with Lumenfacade Max Color Changing -
Lumenfacade Interior
To be Replaced with Lumencore Linear Graze -
Lumenfacade Interior Dynamic White
To be Replaced with Lumencore Linear Graze Dynamic White -
Lumenfacade Interior Color Changing
To be Replaced with Lumencore Linear Graze Color Changing -
Lumenfacade Standalone
To be Replaced With Lumenfacade Max and Pure -
Lumenfacade Standalone Color Changing
To be Replaced with Lumenfacade Max Color Changing