Lumenquad Medium Dynamic White
Dynamic Warm White
Dynamic White
Add to your Selection:
Interior and Exterior LED Projector
The Lumenquad Medium Dynamic White, 28W LED luminaire, has a sleek 2 13/16 in profile with no visible wiring or hardware and seamlessly integrates with any architecture. Lumenpulse's latest generation of LED boards possess an optimised candela and lumens recipe for both Narrow and Wide optics. The Lumenquad Medium Dynamic White is the epitome of versatility and can be configured with numerous options including optics for wallwash and floodlighting, a choice of colour temperatures and colours, as well as various mounting options, accessories, controls, and multiple standard finishes.
Downloads
Documents (0)
0.00/250 MB
Product Configurator
Your Product Code
LQM __ __ __ __ __ __ __
Housing
Color and Color Temperature
Optic
Optical Option 4
Mounting Options 6
Finish
Control 13 14
Notes
- 1 Consult factory for products that are BAA-approved (Buy America.n Act).
- 2 Consult factory for 100 volts.
- 3 Factory installed, not interchangeable on site.
- 4 Optical options are factory installed and cannot be changed in the field.
- 5 Not available with WFL, NAS and WW optics.
- 6 All mounting options (except for SM mounting) are interchangeable. Consult factory for details.
- 7 A cable length of 10 ft or greater must be specified.
- 8 Available for Lumentech poles with a square or round profile. A PLTU - Universal Yoke accessory must be ordered with the Lumentech pole for the Lumentech to fit with the PLTU mounting option. Refer to Lumentech specification sheet and installation instructions for more details.
- 9 For thru-wall mounting.
- 10 Lumenpulse offers a wide selection of RAL CLASSIC (K7) colors with a smooth texture and high-gloss finish. Please consult factory for a list of available K7 colors, other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 11 Longer lead times can be expected for custom RAL color finishes.
- 12 Setup charges apply for RAL colors. Consult factory for details.
- 13 Lumentalk system is enabled with LDB-DMX accessory, DMX/RDM must be specified in the order code. See the typical wiring diagrams in the specification sheet for details.
- 14 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 15 Available for DWW color temperature option only.
- 16 A control box (CBX) and LumenID (LID) must be specified.
- 17 Maximum of 3 ft cable length for daisy chain DMX applications with CBX-DS.
- 18 DALI 2 T8 controller required, provided by others. DALI2 T8 control uses a single DALI short address.
- 19 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 20 Setup charges apply. Consult factory for details.
- 21 Consult European specification sheet and installation instructions for CE wiring information.
- 22 Not applicable to WMRJB, WMRJBNC and WAMRJB 6 in to 24 in mounting options (with or without decorative cover). Cable lengths for these mounting options are determined by the length of the mounting bracket.
- 23 UL fixtures specified with a Smooth white finish and a SM, WM, WMNC, or WAM 6 in to 24 in mounting option (with or without decorative cover) are provided with a white cable. A black cable is provided for all other fixture configurations.
- 24 Not available with WAM24 or WAM24NC mounting options.