Lumenquad Grande Color Changing
Add to your Selection:
Interior and Exterior LED Projector
The Lumenquad Grande Color Changing, 100W LED luminaire, has a sleek 3 7/16 in profile with no visible wiring or hardware and seamlessly integrates with any architecture while also applying dynamic color. Lumenpulse's LED boards possess an optimized candela and lumens recipe for both Narrow and Wide optics. The Lumenquad Grande Color Changing is the epitome of versatility and can be configured with numerous optical, color mixing choices, mounting options, accessories, controls, and multiple standard finishes.
Downloads
Documents (0)
0.00/250 MB
Product Configurator
Your Product Code
LQG __ __ __ __ __ __ __ __
Housing
Color and Color Temperature
Optic1
Optic2
Optical Option 11
Mounting Options 13 14
Finish
Notes
- 1 Consult factory for products that are BAA-approved (Buy America.n Act).
- 2 2700K, 3500K and Royal Blue available, consult factory. Longer lead times apply.
- 3 Not available with XN, VN, NAS and WW optics.
- 4 Consult factory for the availability of more color and CCT options (e.g. royal blue).
- 5 MRGBW30K and MRGBW40K can be configured to MRGB via RDM, consult factory for more details.
- 6 The same optic option must be specified for both boards when MRGBW30K, MRGBW40K or MRGBA is selected.
- 7 Nominal distribution is 3° for RGBW30K, RGBW40K and RGBA color options, and 5° for RGB.
- 8 Factory installed, not interchangeable on site.
- 9 Not available with MRGBW30K, MRGBW40K and MRGBA Opticolor options.
- 10 Cannot be combined with other optics.
- 11 Optical options are factory installed and cannot be changed in the field.
- 12 Not available with WFL, NAS and WW optics.
- 13 All mounting options (except for SM mounting) are interchangeable. Consult factory for details.
- 14 All mounting options have a pivot adjustable in 6° increments, consult factory for universal pivot option.
- 15 A cable length of 10 ft or greater must be specified.
- 16 Available for Lumentech poles with a square or round profile. A PLTU - Universal Yoke accessory must be ordered with the Lumentech pole for the Lumentech to fit with the PLTU mounting option. Refer to Lumentech specification sheet and installation instructions for more details.
- 17 Lumenpulse offers a wide selection of RAL CLASSIC (K7) colors with a smooth texture and high-gloss finish. Please consult factory for a list of available K7 colors, other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 18 Setup charges apply for RAL colors. Consult factory for details.
- 19 Longer lead times can be expected for custom RAL color finishes.
- 20 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 21 A control box (CBX) and LumenID (LID) must be specified.
- 22 Maximum of 3 ft cable length for daisy chain DMX applications with CBX-DS.
- 23 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 24 Setup charges apply. Consult factory for details.
- 25 Consult European specification sheets and installation instructions for CE and CE Class II wiring information.
- 26 Not applicable to WMRJB, WMRJBNC and WAMRJB 6 in to 24 in mounting options (with or without decorative cover). Cable lengths for these mounting options are determined by the length of the mounting bracket.
- 27 UL fixtures specified with a Smooth white finish and a SM, WM, WMNC, or WAM 6 in to 24 in mounting option (with or without decorative cover) are provided with a white cable. A black cable is provided for all other fixture configurations.
- 28 Not available with WAM24 or WAM24NC mounting options.
Related Applications
Related Awards
Related Products
-
Lumenquad Grande
-
Lumenquad Grande Dynamic White
-
Lumenquad Large
-
Lumenquad Large Dynamic White
-
Lumenquad Large Color Changing
-
Lumenquad Small Dynamic White
-
Lumenquad Small Color Changing
New Features -
Lumenquad Medium