Lumenblade Column
Add to your Selection:
Minimalist LED for Outdoor Sites and Areas
The Lumenpulse Lumenblade Column is an outdoor LED luminaire that uses a rectilinear version of the Lumencentro light engine to create a continuous line of light. Options include: heights of either 10 feet or 12 feet, with a Single or Dual head. Its seen-but-not-seen, minimalist design is sustainable, blends with both contemporary and heritage architectures, provides a high level of security, and is sensitive to the natural environment with DarkSky approval, low outputs, and with a BUG rating of 0.
Downloads
Documents (0)
0.00/250 MB
Product Configurator
Your Product Code
BLDC __ __ __ __ __ __ __ __ __
Housing
Voltage
Output (Nominal Lumens) 8
Color and Color Temperature
Distributions
Optical Option
Finish
Option
Anchor Bolts Option
Head Option Height 1
Head Output
Head Color and Color Temperature
Head Distributions
Head Optical Option
Notes
- 1 Not available with CH head option.
- 2 Not available with BH head option.
- 3 Not available with HFSL lens.
- 4 Not available with LT control option.
- 5 Standard IK06 rating for glass lens. IK10 rated polycarbonate lens available, please consult factory.
- 6 Not available with type 5 distribution.
- 7 Available with type 3 and 5 distributions only.
- 8 Lumen output will vary according to the lens and distribution specified for the fixture. Please consult the photometric information section of the specification sheet for more details.
- 9 Available with AMB color temperature only.
- 10 Available with column head XS03 output only.
- 11 Available for CRI 80 only.
- 12 Available for CRI 80 and CRI 90 only.
- 13 Not DarkSky Approved.
- 14 Available for CRI 70 and CRI 80 only.
- 15 Binning within a 3-step McAdam ellipse, with the exception of 5700K.
- 16 Binning within a 2-step MacAdam ellipse, with the exception of 2200K and 5700K.
- 17 Binning within a 2-step MacAdam ellipse.
- 18 Available with CSL lens only.
- 19 Factory installed.
- 20 Specify RAL number followed by “TX” for textured finish (ex: RAL9007TX) or STX for Sandtex finish (ex: RAL9007STX). Textured or Sandtex finishes are recommended for the durability of all products. If a finish is not specified with the RAL number (ex: RAL9007), a glossy finish will be provided. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 21 Setup charges apply for RAL colors. Consult factory for details.
- 22 Longer lead times can be expected for custom RAL color finishes.
- 23 DIM control can be used as NO (On/Off control) if no data is required.
- 24 Not available with PB photoelectric cell, SPR3, SPR3 SC, SPR5, SPR5 SC, SPR7 and SPR7 SC 3-Pin, 5-Pin, and 7-Pin receptacles and MD10N, MD30N, MD50N, MDPN and MDNL motion detector options.
- 25 Vibration tested in accordance with ANSI 136.31 2018 for bridge and overpass applications at 5Gv.
- 26 Specify only if a bridge or overpass application is required.
- 27 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 28 Setup charges apply. Consult factory for details.
- 29 Not available for 480V voltage option.
- 30 Not available with MD10N, MD30N, MD50N, MDPN and MDNL motion detector options.
- 31 A ground fault duplex receptacle (DRG or DRG IU) and a duplex USB receptacle (USB or USB IU) cannot be combined.
- 32 Only one receptacle can be specified per fixture, cannot be combined with motion detector option.
- 33 Not available with PB option.
- 34 The motion detector programming can be modified on site. A remote is required, order separately. See Remote section in the specification sheet for details.
- 35 Only one motion detector can be specified per fixture, cannot be combined with a receptacle.
- 36 MD10N, MD30N, MD50N and MDPN are Wattstopper motion detectors.
- 37 MDNL is an N-Light motion detector.
- 38 Consult factory for details.
- 39 Not available for 347V and 480V voltage options.
- 40 The motion detector is programmed in the factory, as per the settings requested at the time of the order.
- 41 Anchor bolts provided with double nuts, washers and template. One template provided for every 5 luminaires.
- 42 Available for N02, N03, N05, N07 and N10 bollard head outputs only.
- 43 Available for XS03, XS10, XS15, XS20 and XS25 column head outputs only.
- 44 Not available with type 5 distribution when head option is specified for the Lumenblade column.
- 45 Available with type 3 and type 5 distributions when a head option is specified for the Lumenblade column.
- 46 Available with type 2, type 3 and type 4 distributions when a bollard head is specified for the Lumenblade column.
- 47 Available for N03, N05, N07 and N10 bollard head outputs only.
- 48 Available with AMB head color temperature only.
- 49 Available with N02 output when a bollard head is specified. Available with XS03 output when a second column head is specified for the Lumenblade column.
- 50 Not available for FSL and HFSL lens.
- 51 Not available for FSL lens.