Lumenblade Medium
Minimalist LED for Outdoor Sites and Areas
The Lumenpulse Lumenblade Medium is an outdoor LED luminaire that uses a rectilinear version of the Lumencentro light engine to create a continuous line of light. Its seen-but-not-seen, minimalist design is sustainable, blends with both contemporary and heritage architectures, provides a high level of security, and is sensitive to the natural environment. The Lumenblade Medium is available in several lengths, a number of distributions, output options, and DarkSky approval provide a stellar quality of light that brings the night to life.
Options Expand All unfold_more Collapse All unfold_less
4000lm (1 board, 18 7/8 in)
6000lm (1 board, 18 7/8 in)
8000lm (2 boards, 28 1/8 in)
10000lm (2 boards, 28 1/8 in)
12000lm (3 boards, 40 1/8 in)
14000lm (3 boards, 40 1/8 in)
16000lm (3 boards, 40 1/8 in)
18000lm (4 boards, 52 1/8 in)
20000lm (4 boards, 52 1/8 in)
Black Sandtex®
Bronze Sandtex®
Silver Sandtex®
Textured Black
Textured Bronze Non-Metallic
Textured Medium Gray
Textured Green
Textured White
Custom Color and Finish (Please Specify RAL Color)
Type II
Type II Backlight Shield
Type III
Type III Backlight Shield
Type IV
Type IV Backlight Shield
Type V Square
3G ANSI C136.31-2010 Vibration Rating for Bridge Applications
Corrosion-Resistant Coating for Hostile Environments
Surge Protector
3-Pin Receptacle with or without shorting cap
5-Pin Receptacle With or Without Shorting Cap
7-Pin Receptacle With or Without Shorting Cap
Motion detector
Downloads
Documents (0)
0.00/250 MB
Product Configurator
Your Product Code
BLDM SD __ CSL __ __ __ __ __ __ __
Housing
Mounting
Lens 2
Output (Nominal Lumens)
Color and Color Temperature
Distributions
Finish
Option
- 1 Product code is for a single fixture only (S1E configuration). For double configuration (S2E), a second product code must be completed.
- 2 Consult factory for Softsite lens option. Available for 3000lm (1 board), 5000lm (2 boards), 7000lm (3 boards) and 10000lm (4 boards) outputs.
- 3 Motion detector options add 6 1/4 in to total length of fixture.
- 4 Available up to 277V.
- 5 Not available with LT control option.
- 6 Available for CRI 80 only.
- 7 Available for CRI 80 and CRI 90 only.
- 8 Not DarkSky Approved.
- 9 Available for CRI 70 and CRI 80 only.
- 10 Binning within a 3-step McAdam ellipse, with the exception of 5700K.
- 11 Binning within a 2-step MacAdam ellipse, with the exception of 2200K and 5700K.
- 12 Binning within a 2-step MacAdam ellipse.
- 13 Specify RAL number followed by “TX” for textured finish (ex: RAL9007TX) or STX for Sandtex finish (ex: RAL9007STX). Textured or Sandtex finishes are recommended for the durability of all products. If a finish is not specified with the RAL number (ex: RAL9007), a glossy finish will be provided. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 14 Setup charges apply for RAL colors. Consult factory for details.
- 15 Longer lead times can be expected for custom RAL color finishes.
- 16 DIM control can be used as NO (On/Off control) if no data is required.
- 17 Not available with SPR3, SPR3 SC, SPR5, SPR5 SC, SPR7 and SPR7 SC 3-Pin, 5-Pin, and 7-Pin receptacles options and MD10N, MD10W, MD30N, MD30W, MD50N, MD50W, MDPN and MDPW motion detector options.
- 18 Available with S40, S60, M80 and M100 output options only.
- 19 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 20 Setup charges apply. Consult factory for details.
- 21 Only one receptacle can be specified per fixture, cannot be combined with motion detector option.
- 22 The motion detector programming can be modified on site. A remote is required, order separately. See Remote section in the specification sheet for details.
- 23 Only one motion detector can be specified per fixture, cannot be combined with a receptacle.
- 24 The motion detector is programmed in the factory, as per the settings requested at the time of the order.
- 25 Consult Pole Mounting Adaptor section for standard available configurations.
Related Applications
Related Projects
Related Products
-
Lumenblade Small
-
Lumenblade Small Wall Mount Horizontal
New -
Lumenblade Small Wall Mount Perpendicular
New -
Straight Poles
-
Muffler Poles
-
Lumentech Pole
-
Lumenblade Column
-
Lumenblade Bollard