Lumenblade Bollard
Add to your Selection:
Minimalist LED for Outdoor Sites and Areas
The Lumenpulse Lumenblade Bollard is an outdoor LED luminaire that uses a rectilinear version of the Lumencentro light engine to create a continuous line of light. Options include heights of either two-feet or three-feet, with a Single or Dual head. Its seen-but-not-seen, minimalist design is sustainable, blends with both contemporary and heritage architectures, provides a high level of security, and is sensitive to the natural environment with DarkSky approval, low outputs, and a BUG rating of 0.
Downloads
Documents (0)
0.00/250 MB
Product Configurator
Your Product Code
BLDB __ __ __
Housing
Voltage
Output (Nominal Lumens) 8
Color and Color Temperature
Distributions
Optical Option
Finish
Option
Anchor Bolts Option
Head Option
Head Output
Head Color and Color Temperature
Head Distributions
Head Optical Option
Notes
- 1 A ground fault duplex receptacle (DRG or DRG IU) and a duplex USB receptacle (USB or USB IU) cannot be combined with TM2 mounting.
- 2 Not available with LT control option.
- 3 Standard IK06 rating for glass lens. IK10 rated polycarbonate lens available, please consult factory.
- 4 Not available with type 5 distribution.
- 5 Available with type 3 and 5 distributions only.
- 6 Available with Type 2, 3 and 4 distributions only.
- 7 Available for N03, N05, N07 and N10 outputs only.
- 8 Lumen output will vary according to the lens and distribution specified for the fixture. Please consult the photometric information section of the specification sheet for more details.
- 9 Available with AMB color temperature only.
- 10 Not available for FSL and HFSL lens.
- 11 Available with N02 output only.
- 12 Available for CRI 80 only.
- 13 Available for CRI 80 and CRI 90 only.
- 14 Not DarkSky Approved.
- 15 Available for CRI 70 and CRI 80 only.
- 16 Binning within a 3-step McAdam ellipse, with the exception of 5700K.
- 17 Binning within a 2-step MacAdam ellipse, with the exception of 2200K and 5700K.
- 18 Binning within a 2-step MacAdam ellipse.
- 19 Available with CSL and HFSL lenses only.
- 20 Factory installed.
- 21 Specify RAL number followed by “TX” for textured finish (ex: RAL9007TX) or STX for Sandtex finish (ex: RAL9007STX). Textured or Sandtex finishes are recommended for the durability of all products. If a finish is not specified with the RAL number (ex: RAL9007), a glossy finish will be provided. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 22 Setup charges apply for RAL colors. Consult factory for details.
- 23 Longer lead times can be expected for custom RAL color finishes.
- 24 DIM control can be used as NO (On/Off control) if no data is required.
- 25 Not available with PB option.
- 26 When combined with 2 ft height option, Lumentalk cannot be combined with a ground fault duplex receptacle (DRG or DRG IU) or a duplex USB receptacle (USB or USB IU).
- 27 Vibration tested in accordance with ANSI 136.31 2018 for bridge and overpass applications at 5Gv.
- 28 Specify only if a bridge or overpass application is required.
- 29 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 30 Setup charges apply. Consult factory for details.
- 31 Not available for 480V voltage option.
- 32 A ground fault duplex receptacle (DRG or DRG IU) and a duplex USB receptacle (USB or USB IU) cannot be combined.
- 33 Anchor bolts provided with double nuts, washers and template. One template provided for every 5 luminaires.