Lumenfacade Horizontal Dynamic White
Slim linear LED luminaire for grazing and floodlighting
The Lumenfacade Horizontal Dynamic White is a low-profile, linear LED luminaire for grazing or floodlighting - with a special feature allowing the selection of any color temperature from 2200K to 3000K or 2700K to 6500K. A slim, 51 mm profile conceals wiring and mounting details, making it easy to integrate into architectural facades. Featuring second generation LED technology, the luminaire is available in 305 mm, 610 mm, 914 mm or 1219 mm sections, and offers a choice of optics grazing or flood lighting; mounting options, finishes, accessories and controls. A unique asymmetric wallwash distribution is also available, providing exceptional uniformity and brightness for walls and signage.
Downloads
Documents (0)
0.00/250 MBProduct Configurator
Your Product Code
LOGH __ __ __ __ __ __ __ __
Housing 1
Color and Color Temperature
Optic
Mounting Options
Finish
Control
Option
Buy America.n Act
- 1 Power consumption is typically 20% higher for 305 mm fixture lengths.
- 2 347 volts available, consult factory for details.
- 3 To connect 305 mm fixture lengths to the Lumentalk system, DMX/RDM must be specified as the control option, and a Lumentalk Data Bridge (LDB-DMX) is required. See the typical wiring diagrams in the specification sheet for details.
- 4 For best results, we recommend a 152 mm setback from surface. Contact factory for application support.
- 5 Suitable to use when 3GV option is specified.
- 6 Lumenpulse offers a wide selection of RAL CLASSIC (K7) colors with a smooth texture and high-gloss finish. Please consult factory for a list of available K7 colors, other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 7 Setup charges apply for RAL colors. Consult factory for details.
- 8 Longer lead times can be expected for custom RAL color finishes.
- 9 Available for 610 mm, 914 mm and 1219 mm fixture lengths only.
- 10 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 11 Available for DWW color temperature option only.
- 12 A control box (CBX) and LumenID (LID) must be specified.
- 13 DALI 2 T8 controller required, provided by others. DALI2 T8 control uses a single DALI short address.
- 14 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 15 Setup charges apply. Consult factory for details.
- 16 Available with UMP and UMAS mounting options only.
- 17 Consult European specification sheet and installation instructions for CE wiring information.
- 18 Not available with CE certification option.
- 19 Contact your Lumenpulse Sales Representative for more information on order volume details.