Lumenfacade Standalone Color Changing
High performance single unit linear LED luminaire
The Lumenfacade Stand Alone Colour Changing is a high-performance, linear LED luminaire for outdoor applications where individual units are preferred to continuous rows. The luminaire can be mounted to surfaces for colourful wall grazing or floodlighting, or suspended from ceilings to light large public spaces in colour. Available in 305 mm, 610 mm, 914 mm or 1219 mm sections, the luminaire offers a wide number of options including a choice of optics for grazing or floodlighting; RGB, RGBW, or RGBA colour mixing; various mounting options, finishes, accessories and controls; as well as Legacy or Custom output modes.
Downloads
Documents (0)
0.00/250 MBProduct Configurator
Your Product Code
LOGP __ __ __ __ __ __ __ __
Color and Color Temperature
Optic
Mounting Options
Finish
- 1 Power consumption is typically 20% higher for 305 mm fixture lengths.
- 2 347 volts available, consult factory for details.
- 3 To connect 305 mm fixture lengths to the Lumentalk system, DMX/RDM must be specified as the control option, and a Lumentalk Data Bridge (LDB-DMX) is required. See the typical wiring diagrams in the specification sheet for details.
- 4 2700K, 3500K and Royal Blue available, consult factory. Longer lead times apply.
- 5 For best results, we recommend a 152 mm setback from surface. Contact factory for application support.
- 6 Suitable to use when 3GV option is specified.
- 7 Lumenpulse offers a wide selection of RAL CLASSIC (K7) colors with a smooth texture and high-gloss finish. Please consult factory for a list of available K7 colors, other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 8 Setup charges apply for RAL colors. Consult factory for details.
- 9 Longer lead times can be expected for custom RAL color finishes.
- 10 Available for 610 mm, 914 mm and 1219 mm fixture lengths only.
- 11 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 12 A Control Box (CBX) and LumenID (LID) must be specified.
- 13 DALI 2 T8 controller required, provided by others. DALI2 T8 control uses a single DALI short address.
- 14 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 15 Setup charges apply. Consult factory for details.
- 16 Available with UMP and UMAS mounting options only.
- 17 Consult European specification sheet and installation instructions for CE wiring information.