Lumencore Cylinder Small Wall Mount Direct/Indirect
Add to your Selection:
High-performance LED with Direct and Indirect Lighting Capabilities
The Lumencore Cylinder Small Wall Mount Direct/Indirect is a high-performance LED luminaire that can simultaneously or individually offer direct and indirect lighting. It is ideal for commercial, residential or hospitality applications and delivers up to 2000 lumens from a 4 in diameter. The Lumencore Cylinder Small Wall Mount Direct/Indirect comes in a number of finishes, or can be color-specified to fit your taste. Its accessories, beam angles, trims, and optics are easily and quickly changeable in the field.
Downloads
Documents (0)
0.00/250 MBProduct Configurator
Your Product Code
LACYS B WM DI __ __ __ __ __ __ __ __ __ __ __ __ __ __
Certification
Mounting
Light Direction
Direct Lighting Color Rendering
Direct Lighting Optics (nominal distribution)
Direct Lighting Control 4
Direct Lighting Accessories 8 9(0/3)
Indirect Lighting Color Rendering
Indirect Lighting Optics (nominal distribution)
Indirect Lighting Control 4
Indirect Lighting Accessories 16 8 9(0/3)
Finish
Bezel
Notes
- 1 The optics and color temperature options specified for direct lighting may limit the available options for indirect lighting. The optics and color temperature options specified for indirect lighting may limit the available options for direct lighting. Refer to website product configurator for all exceptions.
- 2 Available for CR80 only.
- 3 Radiant CRI options available for 3000K only.
- 4 Control options vary according to color temperature, color rendering and optics combination. Refer to website product configurator for details.
- 5 Available up to 1300 lumens (CR80, RCR80, CR90, CR95 or RCR95) and 2000 lumens (CR80, RCR80 or CR90) for NS optic. Available up to 2000 lumens (CR80, RCR80, CR90, CR95 or RCR95) for N, M and W optics.
- 6 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 7 A Control Box (CBX-DS or CBX-ST) and lumenID (LID) must be specified.
- 8 Accessories specified in the fixture code are factory installed but can also be changed in the field. Refer to installation instructions for details. To order accessories separately, refer to the Optical Accessories section of the specification sheet.
- 9 Maximum of two lenses can be installed for direct lighting. Maximum of two lenses can be installed for indirect lighting. The snoot or half snoot can be combined with any accessory. The clear glass lens and softening glass lens cannot be combined together. The linear spread lenses (LSN and LSW) are compatible with the snoot and half snoot accessories only.
- 10 Matte black interior surface, exterior finish matches housing color.
- 11 When combined with another accessory, the HL will be factory-installed in second position (furthest from the LED source).
- 12 Available for NS and N optics only.
- 13 Nominal 15° x 40° distribution when used with the NS optic.
- 14 Nominal 15° x 60° distribution when used with the NS optic.
- 15 No other accessories can be combined with the decorative ring accessory. A decorative ring replaces the bezel on a fixture. If a decorative ring is chosen as a direct lighting accessory, a bezel finish can be selected for indirect lighting. If a decorative ring is chosen as an indirect lighting accessory, a bezel finish can be selected for direct lighting.
- 16 Accessories not available for WW optic.
- 17 The color of the true asymmetric wallwash baffle matches the fixture bezel.
- 18 Available up to 1300 lumens (CR80, RCR80, CR90, CR95 or RCR95) and 2000 lumens (CR80, RCR80 or CR90) for NS and WW optics. Available up to 2000 lumens (CR80, RCR80, CR90, CR95 or RCR95) for N, M and W optics.
- 19 Longer lead times can be expected for custom RAL color finishes.
- 20 Direct and indirect lighting bezel finishes are the same.