Lumencore Cylinder Medium Wall Mount Direct
High-performance LED with Direct Lighting Capabilities
The Lumencore Cylinder Medium Wall Mount Direct is a high-performance LED luminaire. It is ideal for commercial, residential or hospitality applications and delivers up to 5000 lumens from a 6 in diameter. The Lumencore Cylinder Medium Wall Mount Direct comes in a number of finishes, or can be color-specified to fit your taste. Its accessories, beam angles, trims, and optics are easily and quickly changeable in the field.
Options Expand All unfold_more Collapse All unfold_less
Extra Narrow Spot 5°
Narrow 25°
Narrow Faceted Reflector 25°
Medium 40°
Medium Faceted Reflector 40°
Wide 60°
Wide Faceted Reflector 60°
Snoot
Half Snoot
Honeycomb Louver
Clear Glass Lens
Softening Glass Lens
Linear Spread Lens Narrow (1° x 40°)
Linear Spread Lens Wide (1° x 60°)
700 lm
1000 lm
1300 lm
2000 lm
3000 lm
4000 lm
5000 lm
On/Off Control
Phase Dimming
Phase 1% Dimming
Standard 0-10V Dimming to 1% Linear Curve
1-10V Dimming 1% Linear
1-10V Dimming 1% Logarithmic
Pro 1-10V Dimming, 0.1% Linear
Pro 1-10V Dimming, 0.1% Logarithmic
Standard DALI Dimming 1% Linear
Standard DALI Dimming, 1% Linear
Standard DALI Dimming, 1% Logarithmic
Pro DALI Dimming 0.1% Linear
Pro DALI Dimming 0.1% Logarithmic
Lumentalk Dimming
DMX/RDM Enabled
Matte White
Matte Black
Matte Brown
Matte Orange
Matte Green
Matte Blue
Matte Silver
Glossy White
Glossy Black
Glossy Yellow
Glossy Red
Glossy Violet
Glossy Green
Glossy Ivory
Concrete Grey
Metalized Grey
Italian Brick Red
Parget White
Custom Color and Finish (Please Specify RAL Color)
Downloads
Documents (0)
0.00/250 MB
Product Configurator
Your Product Code
LACYM A WM D __ __ __ __ __ __ __ __ __ b __
Certification
Mounting
Light Direction
Direct Lighting Output (nominal lumens)
Direct Lighting Color Rendering
Direct Lighting Optics (nominal distribution)
Direct Lighting Control 9
Direct Lighting Accessories 20 21(0/3)
Finish
Bezel
Bezel Finish
- 1 Refer to website product configurator for all exceptions.
- 2 Available for NS, N, NFR, M, MFR, W and WFR optics only.
- 3 Available for M and W optics only.
- 4 Available for CR90 only.
- 5 Available for CR80 only.
- 6 Radiant CRI options available for 3000K only.
- 7 Available for 700 lumens when combined with CR80 or CR90 color rendering options only.
- 8 Available up to 2000 lumens.
- 9 Control options vary according to color temperature, color rendering and optics combination. Refer to website product configurator for details.
- 10 Available for 120V voltage option only.
- 11 Available up to 3000 lumens when combined with CR80 or CR90 color rendering option. Available up to 2000 lumens when combined with CR80, CR90 or CR95 color rendering options.
- 12 Manufacturer's choice driver. Order code is subject to change.
- 13 Manufacturer's choice driver. Order code may change to DAMC1 or DAMC2.
- 14 Not available for XN and VN optics.
- 15 Not available with 347V.
- 16 Driver cuts off power to the fixture when the control signal drops below 0.5V.
- 17 Available for DTW and DTWP color options only, when combined with 1000, 1300 or 2000 lumens.
- 18 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 19 A Control Box (CBX-DS or CBX-ST) and lumenID (LID) must be specified.
- 20 Maximum of two lenses can be installed per fixture. The Snoot (SN) or Half Snoot (HSN) can be combined with any accessory. The Clear Glass Lens (GL) and Softening Glass Lens (SL) cannot be combined together. The Linear Spread Lenses (LSN and LSW) are compatible with the Snoot and Half Snoot accessories only.
- 21 Accessories specified in the fixture code are factory installed but can also be changed in the field. Refer to installation instructions for details. To order accessories separately, refer to the Optical Accessories section of the specification sheet.
- 22 Matte black interior surface, exterior finish matches housing color.
- 23 When combined with another accessory, the HL will be factory-installed in second position (furthest from the LED source).
- 24 Nominal 10° x 40° distribution when used with the NS optic.
- 25 Nominal 10° x 60° distribution when used with the NS optic.
- 26 Longer lead times can be expected for custom RAL color finishes.
Related Applications
Related Awards
-
Cylinders and M3 Projector Win Product Innovation Awards
-
Lumenpulse Cylinders - 2018 Red Dot Design Award
Related Products
-
Lumencore Cylinder Medium Pendant
New Features -
Lumencore Cylinder Medium Surface Mount
New Features -
Lumencore Cylinder Medium Wall Mount Indirect
New Features -
Lumencore Cylinder Medium Wall Mount Direct/Indirect
New Features -
Lumencore Cylinder Nano Wall Mount Direct
New Features -
Lumencore Cylinder Small Wall Mount Direct
New Features -
Lumencore Cylinder Large Wall Mount Direct
New Features