Lumencore Recessed Small Wallwash
Add to your Selection:
High-performance LED downlight for ceiling applications
The Lumencore Recessed Small Wallwash is a high-performance LED downlight for wallwash applications. Available in an array of trims and finishes, outputs, color and renderings, these luminaires are here to outperform. The Lumencore Recessed Small Wallwash possesses a previously unseen lifespan, is quick to install, and can be used with a number of different control options.
Downloads
Documents (0)
0.00/250 MBInstallation Instructions
Installation Instructions - Bodine Emergency Battery
PDFdownloadaddInstallation Instructions - Iota Emergency Battery
PDFdownloadaddInstallation Instructions - Driver Replacement
PDFdownloadaddInstallation Instructions (RM installation type)
PDFdownloadaddInstallation Instructions (NC installation type)
PDFdownloadaddInstallation Instructions (PC, IC, IC/AT installation types)
PDFdownloadaddInstallation Instructions (RMR Installation Type)
PDFdownloadadd
Lumencore Installation Videos
Related Documents
Product Configurator
Your Product Code
LCRS A WA __ __ __ __ __ __ __ __ __ __ __ NA
Certification
Type
Optics (Nominal Distribution)
Control 10
Decorative Bezel
Decorative Bezel Finish
Trim 35
Trim Finish 35
Installation Type
Option
Accessories
Notes
- 1 Refer to website product configurator for all exceptions.
- 2 Not available for 700 lumens. Not available for 1000 lumens when combined with 80 color rendering option.
- 3 Not available for DAS optic.
- 4 Available for CRI 80 only.
- 5 Available up to 2000 lumens when combined with 80, 90 or 95 color rendering options.
- 6 Available up to 1300 lumens when combined with 80, 90 or 95 color rendering options.
- 7 The color of the double asymmetric baffle is metallic gray.
- 8 Available up to 1300 lumens when combined with 80, 90 or 95 color rendering options and 2000 lumens when combined with 80 color rendering option.
- 9 The color of the asymmetric wallwash baffle matches the color specified for the decorative bezel.
- 10 Control options vary according to color temperature, color rendering, optics and installation type combination. Refer to website product configurator for details.
- 11 Manufacturer's choice driver. Order code may change to NO1.
- 12 Not available with 347V.
- 13 Manufacturer's choice driver. Order code may change to DAMC1 or DAMC2.
- 14 Driver cuts off power to the fixture when the control signal drops below 0.5V.
- 15 Manufacturer's choice driver. Order code may change to PH1 or PH2.
- 16 Available for 120V voltage option only.
- 17 Manufacturer's choice driver. Order code is subject to change.
- 18 Not available for 700 lumens.
- 19 Not available for DAS optic when combined with 1000 lumens.
- 20 One EcoSystem® address per fixture.
- 21 Requires Caseta Wireless Dimmer PRO Wall Dimmer.
- 22 Consult factory for CA control option.
- 23 Available for RM, NC And RMR installation types only.
- 24 When used with RMR installation type, the installer is responsible for verifying the wireless distance limitations of the main controller to the remote driver installation.
- 25 Configurable between 8 or 16-bit dimming control via RDM. DMX/RDM requires LumenID, LumenID software and onsite commissioning.
- 26 A Control Box (CBX-DS or CBX-ST) and lumenID (LID) must be specified.
- 27 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 28 1% minimum dimming value.
- 29 Available for AWW and DAS optics only.
- 30 Available for WW optic only.
- 31 Coming soon, consult factory for details.
- 32 Not available for SB bezel.
- 33 Longer lead times can be expected for custom RAL color finishes.
- 34 Refer to Cylinder specification sheet and brochure for color options.
- 35 Not available for IWW optic when combined with IRB decorative bezel.
- 36 Cannot be combined with square ceiling cutout.
- 37 Cannot be combined with round ceiling cutout.
- 38 Remote distance is a maximum of 75 ft. For longer remote distances, please contact Lumenpulse Application Engineering Team for application validation.
- 39 Ceiling springs are field changeable, consult factory and installation instructions for details.
- 40 Available for RM and NC installation types only.
- 41 Emergency battery backup options require ceiling access for test button use. The battery will operate for 90 minutes minimum and maintain a minimum of 1 fc from a 7 ft 2 in height as per UL 924. For indoor use only in dry or damp locations.
- 42 Emergency battery backup options are field installed and not presided by Lumenpulse. Refer to related installation instructions for details.
- 43 Not available with LT control option.