Lumenline Pendant Regressed Lens Direct
Discreet, flexible pendants for general lighting indoors
The Lumenline Pendant Regressed Lens Direct is part of a configurable system of linear LED luminaires providing a discreet, flexible solution for commercial and institutional environments such as offices and classrooms. These luminaires deliver up to 91 lm/W. Lit corners and a quick connect system allow uninterrupted lines and shapes to blend seamlessly into the architecture. Available in single units or continuous runs, the system offers a choice of outputs (6W/ft or 12W/ft), colours, colour temperatures, and control options, as well as Legacy or Custom output modes.
Videos
Downloads
Documents (0)
0.00/250 MBSpecification Sheets
Specification Sheet
PDFdownloadadd
Brochures
Lumenline Brochure
PDFdownloadadd
Installation Instructions
Installation Instructions
PDFdownloadadd
Certifications
UL Certificate of Compliance
ZIPdownloadadd
Related Documents
Continuous Run Guide
PDFdownloadaddUnlit Joiner Guide
PDFdownloadaddSubmittal Drawings - Shapes With Lit Joiner
ZIPdownloadaddSubmittal Drawings - Continuous Runs
ZIPdownloadaddMounting Guide
PDFdownloadaddPower and Data Cable Installation Guide
PDFdownloadaddTM-30 and Spectral Power Distribution Guide
PDFdownloadadd
Product Configurator
Your Product Code
LLI2P RG D __ __ __ WFL __ __ __
Light Direction
Length
Joiner Type
Direct Lighting Output & Color Temperature 2
Direct Lighting Optics (nominal distribution)
Control
Mounting Options
Finish 9
- 1 Lumentalk system is enabled with LDB accessory for 1 ft fixture lengths. For white light applications with 1 ft fixtures, DIM or DMX/RDM must be specified in the order code. For RGB applications with 1 ft fixtures, DMX/RDM must be specified in the order code. See specification sheet for details.
- 2 Consult factory for 6500K and 90+ CRI.
- 3 RO RGB option requires DMX/RDM or LT control to be specified in control section.
- 4 A DMX Lumentranslator and controller are required for RGB Lumentalk applications.
- 5 10% minimum dimming value. Current Sink: 3mA/fixture, Current Source: 0.5mA/fixture.
- 6 1% minimum dimming value. Available with white light only. Consult Typical Wiring Diagram pages for the number of DALI addresses per fixture length and type.
- 7 A control box (CBX) and LumenID (LID) must be specified.
- 8 1% minimum dimming value. Available with white light only. Fixtures set to by fixture resolution (consult the Resolution Details pages for the number of DMX addresses per fixture length and type).
- 9 Standard white finish for fixture cable and canopy, consult factory for other options.
- 10 Lumenpulse offers a wide selection of RAL CLASSIC (K7) colors with a smooth texture and high-gloss finish. Please consult factory for a list of available K7 colors, other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.