Lumenbeam Small Color Changing
Add to your Selection:
Compact Color-Changing LED Projector for Landscapes and Architecture
The Lumenbeam Small Colour Changing is a compact, IP66-rated luminaire for lighting landscapes, trees, columns, monuments, and architectural details. The system offers numerous options including optics for flood or accent lighting, a choice of colour mixing, as well as various accessories, spread lenses, and controls. The luminaire also has an anti-corrosion option for use in harsh, chemical, or coastal environments.
Downloads
Documents (0)
0.00/250 MBProduct Configurator
Your Product Code
LBS __ __ __ __ __ __ __ __
Housing
Color and Color Temperature
Optic
Optical Option 11 12 13
Finish
Option
Certification
Cable Length 21 29
Notes
- 1 Not available for VN, NAS and WW optics.
- 2 Consult factory for the availability of more color and CCT options (e.g. royal blue).
- 3 MRGBWP can be configured to MRGB via RDM, consult factory for more details.
- 4 Fixtures are shipped from the factory in Optidrive™ Mode. Normal Mode can be activated onsite for DMX/RDM and LT fixtures. For DMX/RDM applications, Optidrive Mode requires a LumenID, LumenID software and onsite commissioning. For LT applications, Optidrive Mode requires a LumentalkID, LumentalkID software and onsite commissioning. Additionally, with Opticolor+™ the white CCT is configurable in the field from 1800K-8000K.
- 5 Consult factory for DALIT8 applications with MRGBWP and a CCT other than 3000K.
- 6 Factory installed, not interchangeable on site.
- 7 Not available with MRGBA and MRGBWP color temperature options.
- 8 A dome lens accessory is available, order separately. For compatibility, a WFL optic must be specified for the fixture.
- 9 Available with MRGBA and MRGBWP color temperature options only.
- 10 Consult factory for photometric performance.
- 11 Optical options are factory installed and cannot be changed in the field.
- 12 Not available with WFL, NAS and WW optics when combined with RGB color temperature option.
- 13 Not available with VN, WFL, VWFL, NAS and WW optics when combined with MRGBA or MRGBWP color temperature options.
- 14 Field adjustable spread lens optical accessory available, order separately.
- 15 Lumenpulse offers a wide selection of RAL CLASSIC (K7) colors with a smooth texture and high-gloss finish. Please consult factory for a list of available K7 colors, other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 16 Setup charges apply for RAL colors. Consult factory for details.
- 17 Longer lead times can be expected for custom RAL color finishes.
- 18 Lumentalk system is enabled with LDB-DMX accessory, DMX/RDM must be specified in the order code. See the typical wiring diagrams in the specification sheet for details.
- 19 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 20 A control box (CBX) and LumenID (LID) must be specified.
- 21 Maximum of 3 ft cable length for daisy chain DMX applications with CBX-DS.
- 22 DALI 2 T8 controller required, provided by others. DALI2 T8 control uses a single DALI short address.
- 23 Consult factory for applications with 3GV requirements.
- 24 3GV option is available for standard yoke mounting only.
- 25 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 26 Setup charges apply. Consult factory for details.
- 27 Consult European specification sheets and installation instructions for CE and CE Class II wiring information.
- 28 Not available with DALIT8 control option when combined with RGB color temperature option.
- 29 3 ft cable length is standard unless otherwise specified.
- 30 Not available with CE or CEII certification options.