Lumenfacade Max Continuous Horizontal Dynamic White
Dynamic warm white
Dynamic white
Add to your Selection:
Linear LED luminaire for grazing and floodlighting
The Lumenfacade Max Dynamic White introduces never-before-seen technologies and is the first linear fixture in the world to feature Opticolor™, Lumenpulse's revolutionary, patented mixed-at-source technology. Available in three colour temperature ranges, as well as Lumenpulse's Dim to Warm option, the Lumenpulse Max Dynamic White allows you the variability to dial each project to your vision.
Downloads
Documents (0)
0.00/250 MB
Product Configurator
Your Product Code
LFM CH __ __ __ __ __ __ __ __ __ __ __ XD __ __
Housing
Voltage
Color and Color Temperature
Optic
Control
Vibration Rating 23
Mounting Options 28
Environment
Finish
Accessories 39 40
Buy America.n Act
Notes
- 1 Available for 120_277 voltage option only.
- 2 Available for 230 voltage option only.
- 3 Available for the Japanese market only.
- 4 Available for 100_200V voltage option only.
- 5 Consult your local Sales Representative for PSE certification.
- 6 Available for UL certification only.
- 7 Available for CE certification only.
- 8 Available for PSE Certification only.
- 9 Consult factory for applications with 12 in fixtures.
- 10 Consult factory for applications with PSE Certification.
- 11 Available with DALIT8, LT and DMX/RDM control options.
- 12 Available with LT, DMX/RDM and DIM control options.
- 13 For best results use a miminum 6 in setback from surface. Contact factory for application support.
- 14 Can be combined with a CL or FR lens only.
- 15 Can be combined with a HFR or FR lens only.
- 16 DALI 2 T8 controller required, provided by others. DALI2 T8 control uses a single DALI short address.
- 17 Minimum dimming value is less than 1%.
- 18 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 19 A Control Box (CBX) and LumenID (LID) must be specified.
- 20 Available for MDTW color temperature option only.
- 21 An Ethernet CBX is required. Refer to the ETX configuration in the Ethernet CBX Specification Sheet for details.
- 22 ETX Control Option is not compatible with LFTJ T-Junction Accessory.
- 23 Consult factory for vibration rating requirements on vertical installations.
- 24 Available for all mounting options.
- 25 Available for FXH mounting option when combined with VRN vibration rating. All other mounting options may have installation limitations, and a review is needed for approval. Consult factory.
- 26 Consult factory for pole mounting accessories.
- 27 Available for FXH mounting option when combined with VRBO vibration rating. All other mounting options may have installation limitations, and a review is needed for approval. Consult factory.
- 28 One mounting bracket provided for 12 in fixtures. Two mounting brackets provided for 24 in, 36 in and 48 in fixtures.
- 29 Available with NVR vibration rating only. Installation limitations may apply for other vibration rating options, and a review is needed for approval. Consult factory.
- 30 Not suitable for bridge and overpass applications.
- 31 Vibration tested in accordance with ANSI 136.31 2018 at 3Gv.
- 32 Vibration tested in accordance with ANSI 136.31 2018 at 1.5Gv.
- 33 Vibration tested in accordance with ANSI 136.31 2018 at 2.3Gv.
- 34 Vibration tested in accordance with ANSI 136.31 2018 at 4.6Gv.
- 35 Zirconium pretreatment completed with corrosion-resistant primer and electrostatically-applied powder coat paint finish.
- 36 Lumenpulse offers a wide selection of RAL CLASSIC (K7) colors with a smooth texture and high-gloss finish. Please consult factory for a list of available K7 colors, other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 37 Setup charges apply for RAL colors. Consult factory for details.
- 38 Longer lead times can be expected for custom RAL color finishes.
- 39 Maximum one accessory per fixture.
- 40 The exterior finish of the accessory will match the finish specified in the fixture order code (interior surface painted matte black).
- 41 Available for 10x10, 10x30, 10x60, 10x90, 30x30, 30x60, 30x90, 60x60, 90x90, 30x10, 60x10, 60x30, 90x10 and W optics only.
- 42 Contact your Lumenpulse Sales Representative for more information on order volume details.
Related Applications
Related Products
-
Lumenfacade Max Continuous Run
New Options -
Lumenfacade Max Continuous Run Dynamic White
New Options -
Lumenfacade Max Continuous Run Color Changing
New Options -
Lumenfacade Max Continuous Horizontal
New Options -
Lumenfacade Max Continuous Horizontal Color Changing
New Options -
Lumenfacade Max Standalone
New Options -
Lumenfacade Max Standalone Dynamic White
New Options -
Lumenfacade Max Standalone Color Changing
New Options