Lumenblade Bollard
Minimalist LED for Outdoor Sites and Areas
The Lumenpulse Lumenblade Bollard is an outdoor LED luminaire that uses a rectilinear version of the Lumencentro light engine to create a continuous line of light. Options include heights of either two-feet or three-feet, with a Single or Dual head. Its seen-but-not-seen, minimalist design is sustainable, blends with both contemporary and heritage architectures, provides a high level of security, and is sensitive to the natural environment with DarkSky approval, low outputs, and a BUG rating of 0.
Options Expand All unfold_more Collapse All unfold_less
200lm (4 LEDs)
300lm (4 LEDs)
500lm (4 LEDs)
700lm (4 LEDs)
1000lm (4 LEDs)
Black Sandtex®
Bronze Sandtex®
Silver Sandtex®
Textured Black
Textured Bronze Non-Metallic
Textured Medium Gray
Textured Green
Textured White
Custom Color and Finish (Please Specify RAL Color)
Amber
2200K
2700K
3000K
3500K
4000K
5700K
Type II
Type II Backlight Shield
Type III
Type III Backlight Shield
Type IV
Type IV Backlight Shield
Type V
Type V Square
Downloads
Documents (0)
0.00/250 MB
Product Configurator
Your Product Code
BLDB __ __ __
Housing
Voltage
Output (Nominal Lumens) 8
Color and Color Temperature
Distributions
Optical Option
Finish
Option
Anchor Bolts Option
Head Option
Head Output
Head Color and Color Temperature
Head Distributions
Head Optical Option
- 1 A ground fault duplex receptacle (DRG or DRG IU) and a duplex USB receptacle (USB or USB IU) cannot be combined with TM2 mounting.
- 2 Not available with LT control option.
- 3 Standard IK06 rating for glass lens. IK10 rated polycarbonate lens available, please consult factory.
- 4 Not available with type 5 distribution.
- 5 Available with type 3 and 5 distributions only.
- 6 Available with Type 2, 3 and 4 distributions only.
- 7 Available for N03, N05, N07 and N10 outputs only.
- 8 Lumen output will vary according to the lens and distribution specified for the fixture. Please consult the photometric information section of the specification sheet for more details.
- 9 Available with AMB color temperature only.
- 10 Not available for FSL and HFSL lens.
- 11 Available with N02 output only.
- 12 Available for CRI 80 only.
- 13 Available for CRI 80 and CRI 90 only.
- 14 Not DarkSky Approved.
- 15 Available for CRI 70 and CRI 80 only.
- 16 Binning within a 3-step McAdam ellipse, with the exception of 5700K.
- 17 Binning within a 2-step MacAdam ellipse, with the exception of 2200K and 5700K.
- 18 Binning within a 2-step MacAdam ellipse.
- 19 Available with CSL and HFSL lenses only.
- 20 Factory installed.
- 21 Specify RAL number followed by “TX” for textured finish (ex: RAL9007TX) or STX for Sandtex finish (ex: RAL9007STX). Textured or Sandtex finishes are recommended for the durability of all products. If a finish is not specified with the RAL number (ex: RAL9007), a glossy finish will be provided. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 22 Setup charges apply for RAL colors. Consult factory for details.
- 23 Longer lead times can be expected for custom RAL color finishes.
- 24 DIM control can be used as NO (On/Off control) if no data is required.
- 25 Not available with PB option.
- 26 When combined with 0.6 m height option, Lumentalk cannot be combined with a ground fault duplex receptacle (DRG or DRG IU) or a duplex USB receptacle (USB or USB IU).
- 27 Vibration tested in accordance with ANSI 136.31 2018 for bridge and overpass applications at 5Gv.
- 28 Specify only if a bridge or overpass application is required.
- 29 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 30 Setup charges apply. Consult factory for details.
- 31 Not available for 480V voltage option.
- 32 A ground fault duplex receptacle (DRG or DRG IU) and a duplex USB receptacle (USB or USB IU) cannot be combined.
- 33 Anchor bolts provided with double nuts, washers and template. One template provided for every 5 luminaires.