Lumenblade Small Wall Mount Perpendicular
Minimalist LED for Outdoor Sites and Areas
The Lumenpulse Lumenblade Small Wall Mount Perpendicular is an outdoor LED luminaire that uses a rectilinear version of the Lumencentro light engine to create a continuous line of light. Its seen-but-not-seen, minimalist design is sustainable, blends with contemporary and heritage architectures, provides a high level of security and is sensitive to the natural environment. The Lumenpulse Lumenblade Small Wall Mount Perpendicular has several distributions, outputs, and accessory options. Many accessories such as Motion Detectors, Photocells, Battery Packs, Backlight Shields, and Louvres have been designed to lower environmental impact as well as to meet DarkSky approval. It provides a stellar quality of light that brings the night to life.
Options Expand All unfold_more Collapse All unfold_less
500lm Amber (2 LED Boards)
1500lm (2 LED Boards)
2000lm (2 LED Boards)
2500lm (2 LED Boards)
3000lm (2 LED Boards)
700lm Amber (1 LED Board)
4000lm (1 LED Board)
6000lm (1 LED Board)
1500lm Amber (2 LED Boards)
2000lm (2 LED Boards) BTP
4000lm (2 LED Boards) BTP
8000lm (2 LED Boards)
10000lm (2 LED Boards)
2000lm Amber (3 LED Boards)
6000lm (3 LED Boards) BTP
8000lm (3 LED Boards) BTP
12000lm (3 LED Boards)
14000lm (3 LED Boards)
2500lm Amber (4 LED Boards)
16000lm (4 LED Boards)
18000lm (4 LED Boards)
Black Sandtex®
Bronze Sandtex®
Silver Sandtex®
Textured Black
Textured Bronze Non-Metallic
Textured Medium Gray
Textured Green
Textured White
Custom Color and Finish (Please Specify RAL Color)
Corrosion-Resistant Coating for Hostile Environments
Surge Protector
Button Type Photocell
Motion Detector
Battery Pack
3G ANSI C136.31-2010 Vibration Rating for Bridge Applications
Amber
2200K
2700K
3000K
3500K
4000K
5700K
Type II
Type II Frosted Backlight Shield
Type III
Type III Frosted Backlight Shield
Type IV
Type IV Frosted Backlight Shield
Downloads
Documents (0)
0.00/250 MBBrochures
Brochure LumenbladePDFdownloadadd
Product Configurator
Your Product Code
BLDS WM __ CSL __ __ __ __ __ __
Housing
Mounting
Output (Nominal Lumens)
Color and Color Temperature
Distributions
Optical Option
Finish
Option
Emergency System
- 1 Standard IK06 rating for glass lens.
- 2 Available with AMB color temperature only.
- 3 Not available with LT control option.
- 4 Not available with 480V.
- 5 Not available with BTP option.
- 6 Available for 22K, 27K, 30K, 35K, 40K and 57K color temperatures only.
- 7 Not available for 347V and 480V voltage options.
- 8 Consult factory for details.
- 9 Battery Pack included. BTP must be specified in the product code.
- 10 Not available with PB option.
- 11 Not available with MD10N, MD30N, MD50N, MD70BN, MD50BN, MDPN, MDNL, MDNLW, MDMS and MDMSW motion detector options.
- 12 Available with XS05, S07, M15, L20 and XL25 outputs only.
- 13 Available with Type 2, 3 and 4 distributions only.
- 14 Available for CRI 80 only.
- 15 Available for CRI 80 and CRI 90 only.
- 16 Not DarkSky Approved.
- 17 Available for CRI 70 and CRI 80 only.
- 18 Binning within a 3-step McAdam ellipse, with the exception of 5700K.
- 19 Binning within a 2-step MacAdam ellipse, with the exception of 2200K and 5700K.
- 20 Binning within a 2-step MacAdam ellipse.
- 21 Specify RAL number followed by “TX” for textured finish (ex: RAL9007TX) or STX for Sandtex finish (ex: RAL9007STX). Textured or Sandtex finishes are recommended for the durability of all products. If a finish is not specified with the RAL number (ex: RAL9007), a glossy finish will be provided. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 22 Setup charges apply for RAL colors. Consult factory for details.
- 23 Longer lead times can be expected for custom RAL color finishes.
- 24 DIM control can be used as NO (On/Off control) if no data is required.
- 25 Minimum working temperature is -4 °F.
- 26 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 27 Setup charges apply. Consult factory for details.
- 28 Not available with 480V voltage options when combined with XS15, XS20, XS25, XS30.
- 29 Not available with 347V and 480V voltage options when combined with lumen output S40.
- 30 Can be combined with CRC and 3GV options only.
- 31 MD10N, MD30N, MD50N, MD70BN and MDPN are Wattstopper motion detectors.
- 32 Motion detector option adds 4.23 in to total length of fixture when combined with W1X mounting option.
- 33 Only one motion detector can be specified per fixture.
- 34 Not available with 3GV option.
- 35 MD50BN, MDPN, MDNL, MDNLW, MDMS and MDMSW are Acuity Brands motion detectors.
- 36 The motion detector is programmed in the factory, as per the settings requested at the time of the order.
- 37 Meets ASHRAE 2016 requirements.
- 38 Meets CNEB 2015 requirements.
- 39 Multi-Level dimming compatible (motion detector + daylight based control).
- 40 Coming soon, consult factory for details.
- 41 Vibration tested in accordance with ANSI 136.31 2010 for bridge and overpass applications at 3Gv.
- 42 Included with M40, L60, L80 lumen output options.
- 43 Can be combined with SP and CRC options only.