Lumencore Linear Cove Color Changing
Add to your Selection:
High-Performance Cove Lighting
The Lumencore Linear Cove Color Changing fixture offers a dynamic and flexible lighting solution, perfect for enhancing architectural spaces with vibrant colors and ambient illumination. Leveraging advanced Optidrive technology, this luminaire enables seamless color transitions and an extensive palette of hues, allowing designers to craft unique atmospheres tailored to any occasion. With high lumen output and precise optics, the Lumencore Linear Cove ensures consistent, high-quality performance while integrating smoothly into cove applications. Its sleek design enhances the aesthetics of any environment, making it ideal for both accent and indirect lighting. Elevate your space with captivating color and sophisticated ambiance with this innovative lighting solution.
Downloads
Documents (0)
0.00/250 MBSpecification Sheets
Complete Specsheet - ImperialPDF 4.43 Mdownloadadd
Short Specsheet - ImperialPDF 362.28 kdownloadadd
Specification Sheet - Leader CablePDFdownloadadd- Specification Sheet - Jumper CablePDFdownloadadd
- Specification Sheet - Wiring CompartmentPDFdownloadadd
- Specification Sheet - Lumentalk Data Bridge IndoorPDFdownloadadd
Brochures
Lumencore Linear BrochurePDFdownloadadd
Related Documents
- Photometric GuidePDFdownloadadd
Product Configurator
Your Product Code
LCV UL 120_277 __ __ __ __ __ __ __ __ __ __ __
Housing
Certification
Color and Color Temperature
Mounting Options
Finish
Accessories
Shield Finish
Buy America.n Act
Notes
- 1 Default option if AB Asymmetric Optic is not specified.
- 2 Specify for AB Asymmetric Optic only.
- 3 Lumentalk system is enabled with Lumentalk Data Bridge Indoor (LDBI) accessory. A DMX/RDM control option must be specified in fixture code. See the typical wiring diagrams or consult factory for more details.
- 4 DALI 2 T8 controller required, provided by others. DALI2 T8 control uses a single DALI short address.
- 5 Minimum dimming value is 0.1%.
- 6 A Control Box (CBX-DS or CBX-ST) and lumenID (LID) must be specified.
- 7 ST Mounting Option is required if the LCVAT Alignment Track will be ordered separately.
- 8 ST Mounting Option not available with CC Custom Color and Finish, or SP Special Color Finishes.
- 9 ST Mounting Option is not compatible with SH Shield Accessory.
- 10 Two mounting brackets provided for each fixture length.
- 11 One mounting bracket provided for 12 in fixtures. Two mounting brackets provided for 24 in, 36 in and 48 in fixtures.
- 12 Textured colours and finishes are not available.
- 13 Lumenpulse offers a wide selection of RAL CLASSIC (K7) colors with a smooth texture and high-gloss finish. Please consult factory for a list of available K7 colors, other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 14 Setup charges apply for RAL colors. Consult factory for details.
- 15 Longer lead times can be expected for custom RAL color finishes.
- 16 Concrete Grey (CGY) and Parget White (PWH) are not available as special colors.
- 17 The Cable Color must match the Fixture Finish, unless CC or SP is specified in the product code. If CC or SP is specified as the Fixture Finish in the product code, a WH or BK cable can be specified.
- 18 Default option if AB Asymmetric Optic is specified. NA No Accessory must be specified in the product code.
- 19 Accessories are sold in 12 in sections. The length specified for the fixture will determine the number of accessories provided.
- 20 Not available if CC Custom Color and Finish or SP Special Color is specified in the product code.
- 21 Matte black interior surface, exterior finish matches housing color.
- 22 The SH Shield Accessory is not available with ST Mounting Option.
- 23 The SH Shield Accessory is not available with AB Asymmetric Optic.
- 24 The SH Shield Accessory can be combined with one other accessory.
- 25 Contact your Lumenpulse Sales Representative for more information on order volume details.