Lumenquad Small Color Changing
Add to your Selection:
Compact Color-Changing LED Projector for Landscapes and Architecture
The Lumenquad Small Colour Changing has a sleek 2 11/16 in profile with no visible wiring or hardware and seamlessly integrates with any architecture while also applying dynamic colour. Lumenpulse's latest generation of LED boards possess an optimised candela and lumens recipe for both Narrow and Wide optics. The Lumenquad Small Colour Changing is the epitome of versatility and can be configured with numerous optical, colour mixing choices, mounting options, accessories, controls, and multiple standard finishes.
Downloads
Documents (0)
0.00/250 MB
Product Configurator
Your Product Code
LQS __ __ __ __ __ __ __
Housing
Color and Color Temperature
Optic
Optical Option 12
Mounting Options 14
Finish
Notes
- 1 Consult factory for products that are BAA-approved (Buy America.n Act).
- 2 Consult factory for 100 volts.
- 3 Not available for VN, NAS and WW optics.
- 4 Consult factory for the availability of more color and CCT options (e.g. royal blue).
- 5 MRGBWP can be configured to MRGB via RDM, consult factory for more details.
- 6 Fixtures are shipped from the factory in Optidrive™ Mode. Normal Mode can be activated onsite for DMX/RDM and LT fixtures. For DMX/RDM applications, Optidrive Mode requires a LumenID, LumenID software and onsite commissioning. For LT applications, Optidrive Mode requires a LumentalkID, LumentalkID software and onsite commissioning. Additionally, with Opticolor+™ the white CCT is configurable in the field from 1800K-8000K.
- 7 Consult factory for DALIT8 applications with MRGBWP and a CCT other than 3000K.
- 8 Factory installed, not interchangeable on site.
- 9 Not available with MRGBA and MRGBWP color temperature options.
- 10 Available with MRGBA and MRGBWP color temperature options only.
- 11 Consult factory for photometric performance.
- 12 Optical options are factory installed and cannot be changed in the field.
- 13 Not available with WFL, VWFL, NAS and WW optics.
- 14 All mounting options (except for SM mounting) are interchangeable. Consult factory for details.
- 15 A cable length of 10 ft or greater must be specified.
- 16 Available for Lumentech poles with a square or round profile. A PLTU - Universal Yoke accessory must be ordered with the Lumentech pole for the Lumentech to fit with the PLTU mounting option. Refer to Lumentech specification sheet and installation instructions for more details.
- 17 For thru-wall mounting.
- 18 Lumenpulse offers a wide selection of RAL CLASSIC (K7) colors with a smooth texture and high-gloss finish. Please consult factory for a list of available K7 colors, other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 19 Longer lead times can be expected for custom RAL color finishes.
- 20 Setup charges apply for RAL colors. Consult factory for details.
- 21 For RGB applications, a Lumentalk system is enabled with LDB-DMX accessory, DMX/RDM must be specified in the order code. See the typical wiring diagrams in the specification sheet for details.
- 22 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 23 A control box (CBX) and LumenID (LID) must be specified.
- 24 Maximum of 3 ft cable length for daisy chain DMX applications with CBX-DS.
- 25 DALI 2 T8 controller required, provided by others. DALI2 T8 control uses a single DALI short address.
- 26 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 27 Setup charges apply. Consult factory for details.
- 28 Consult European specification sheet and installation instructions for CE wiring information.
- 29 Not applicable to WMRJB, WMRJBNC and WAMRJB 6 in to 24 in mounting options (with or without decorative cover). Cable lengths for these mounting options are determined by the length of the mounting bracket.
- 30 UL fixtures specified with a Smooth white finish and a SM, WM, WMNC, or WAM 6 in to 24 in mounting option (with or without decorative cover) are provided with a white cable. A black cable is provided for all other fixture configurations.
- 31 Not available with WAM24 or WAM24NC mounting options.
Related Applications
Related Products
-
Lumenquad Small Dynamic White
New Options -
Lumenquad Medium
New Options -
Lumenquad Medium Dynamic White
New Options -
Lumenquad Medium Color Changing
New Options -
Lumenquad Large
New Options -
Lumenquad Large Dynamic White
New Options -
Lumenquad Large Color Changing
New Options -
Lumenquad Grande
New Options