Lumenquad Large Color Changing
Color-changing LED projector
The Lumenquad Large Colour Changing has a sleek 3 in profile with no visible wiring or hardware and seamlessly integrates with any architecture while also applying dynamic colour. Lumenpulse's LED boards possess an optimised candela and lumens recipe for both Narrow and Wide optics. The Lumenquad Large Colour Changing is the epitome of versatility and can be configured with numerous optical, colour mixing choices, mounting options, accessories, controls, and multiple standard finishes.
Options Expand All unfold_more Collapse All unfold_less
RGB
RGB + White 3000K
RGB + White 4000K
RGB + Amber
Opticolor Cluster with MRGBA (Red, Green, Blue, Amber)
MRGBWP With Opticolor+™ (Red, Green, Blue and Configurable White 2700-6500K)
Black Sandtex®
Bronze Sandtex®
Silver Sandtex®
Smooth White
Textured Black
Textured Bronze Non-Metallic
Textured Medium Gray
Textured Green
Textured White
Custom Color and Finish (Please Specify RAL Color)
Very Narrow 6°
Narrow Spot 10°
Narrow Flood 20°
Medium 30°
Flood 40°
Wide Flood 60°
Very Wide Flood 90°
Narrow Asymmetric
Asymmetric Wallwash
Snoot
Lumenquad Large Visor
Linear Spread Lens Adjustable
Wire Guard
RGB Honeycomb louver
RGBW RGBA Honeycomb louver
Downloads
Documents (0)
0.00/250 MB
Product Configurator
Your Product Code
LQL __ __ __ __ __ __ __
Housing
Color and Color Temperature
Optic
Optical Option 12
Mounting Options 14 15
Finish
- 1 Consult factory for products that are BAA-approved (Buy America.n Act).
- 2 Consult factory for availability of other color options such as Royal Blue.
- 3 Not available for VN, NAS and WW optics.
- 4 Consult factory for the availability of more color and CCT options (e.g. royal blue).
- 5 MRGBWP can be configured to MRGB via RDM, consult factory for more details.
- 6 Fixtures are shipped from the factory in Optidrive™ Mode. Normal Mode can be activated onsite for DMX/RDM and LT fixtures. For DMX/RDM applications, Optidrive Mode requires a LumenID, LumenID software and onsite commissioning. For LT applications, Optidrive Mode requires a LumentalkID, LumentalkID software and onsite commissioning. Additionally, with Opticolor+™ the white CCT is configurable in the field from 1800K-8000K.
- 7 Consult factory for DALIT8 applications with MRGBWP and a CCT other than 3000K.
- 8 Factory installed, not interchangeable on site.
- 9 Not available with MRGBA and MRGBWP color temperature options.
- 10 Available with MRGBA and MRGBWP color temperature options only.
- 11 Consult factory for photometric performance.
- 12 Optical options are factory installed and cannot be changed in the field.
- 13 Not available with WFL, VWFL, NAS and WW optics.
- 14 All mounting options (except for SM mounting) are interchangeable. Consult factory for details.
- 15 All mounting options have a pivot adjustable in 6° increments, consult factory for universal pivot option.
- 16 A cable length of 10 ft or greater must be specified.
- 17 Available for Lumentech poles with a square or round profile. A PLTU - Universal Yoke accessory must be ordered with the Lumentech pole for the Lumentech to fit with the PLTU mounting option. Refer to Lumentech specification sheet and installation instructions for more details.
- 18 Lumenpulse offers a wide selection of RAL CLASSIC (K7) colors with a smooth texture and high-gloss finish. Please consult factory for a list of available K7 colors, other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 19 Setup charges apply for RAL colors. Consult factory for details.
- 20 Longer lead times can be expected for custom RAL color finishes.
- 21 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 22 Not available with CEII certification option.
- 23 A Control Box (CBX) and LumenID (LID) must be specified.
- 24 Maximum of 3 ft cable length for daisy chain DMX applications with CBX-DS.
- 25 DALI 2 T8 controller required, provided by others. DALI2 T8 control uses a single DALI short address.
- 26 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 27 Setup charges apply. Consult factory for details.
- 28 Consult European specification sheets and installation instructions for CE and CE Class II wiring information.
- 29 Not applicable to WMRJB, WMRJBNC and WAMRJB 6 in to 24 in mounting options (with or without decorative cover). Cable lengths for these mounting options are determined by the length of the mounting bracket.
- 30 UL fixtures specified with a Smooth white finish and a SM, WM, WMNC, or WAM 6 in to 24 in mounting option (with or without decorative cover) are provided with a white cable. A black cable is provided for all other fixture configurations.
- 31 Not available with WAM24 or WAM24NC mounting options.
Related Applications
Related Awards
Related Products
-
Lumenquad Large
New Options -
Lumenquad Large Dynamic White
New Options -
Lumenquad Grande
New Options -
Lumenquad Grande Dynamic White
New Options -
Lumenquad Grande Color Changing
New Options -
Lumenquad Small Dynamic White
New Options -
Lumenquad Small Color Changing
New Options -
Lumenquad Medium
New Options