Lumenblade Column
Agregar a su Selección:
Luminaria minimalista para iluminación pública exterior
Lumenblade Column es una luminaria LED para exteriores que utiliza una version rectilínea de la tecnología de iluminación Lumencentro para crear una luz continua. Sus opciones incluyen: alturas de 10 o 12 pies, con cabezal doble o sencillo. Su diseño discreto, distintivo y minimalista, es duradero y se integra tanto en la arquitectura contemporánea como patrimonial, ofrece un alto nivel de seguridad y se adapta al entorno con flujos bajos, además, cuenta con una clasificación BUG de 0.
Características Expandir todo unfold_more Contraer todo unfold_less
Descargas
Documentos (0)
0.00/250 MB
Configurador de productos
Su código de producto
BLDC __ __ __ __ __ __ __ __ __
Carcasa
Voltaje
Flujo luminoso 8
Color y temperatura de color
Distribución
Opción óptica
Acabado
Opción
Anchor Bolts Option
Head Option Height 1
Head Output
Head Color and Color Temperature
Head Distributions
Head Optical Option
Nota
- 1 Not available with CH head option.
- 2 Not available with BH head option.
- 3 Not available with HFSL lens.
- 4 Not available with LT control option.
- 5 Standard IK06 rating for glass lens. IK10 rated polycarbonate lens available, please consult factory.
- 6 Not available with type 5 distribution.
- 7 Available with type 3 and 5 distributions only.
- 8 Lumen output will vary according to the lens and distribution specified for the fixture. Please consult the photometric information section of the specification sheet for more details.
- 9 Available with AMB color temperature only.
- 10 Available with column head XS03 output only.
- 11 Nur für CRI 80 verfügbar.
- 12 Available for CRI 80 and CRI 90 only.
- 13 Not DarkSky Approved.
- 14 Available for CRI 70 and CRI 80 only.
- 15 Binning within a 3-step McAdam ellipse, with the exception of 5700K.
- 16 Binning within a 2-step MacAdam ellipse, with the exception of 2200K and 5700K.
- 17 Binning within a 2-step MacAdam ellipse.
- 18 Available with CSL lens only.
- 19 Factory installed.
- 20 Specify RAL number followed by “TX” for textured finish (ex: RAL9007TX) or STX for Sandtex finish (ex: RAL9007STX). Textured or Sandtex finishes are recommended for the durability of all products. If a finish is not specified with the RAL number (ex: RAL9007), a glossy finish will be provided. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 21 Setup charges apply for RAL colors. Consult factory for details.
- 22 Longer lead times can be expected for custom RAL color finishes.
- 23 DIM control can be used as NO (On/Off control) if no data is required.
- 24 Not available with PB photoelectric cell, SPR3, SPR3 SC, SPR5, SPR5 SC, SPR7 and SPR7 SC 3-Pin, 5-Pin, and 7-Pin receptacles and MD10N, MD30N, MD50N, MDPN and MDNL motion detector options.
- 25 Vibration tested in accordance with ANSI 136.31 2018 for bridge and overpass applications at 5Gv.
- 26 Specify only if a bridge or overpass application is required.
- 27 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 28 Setup charges apply. Consult factory for details.
- 29 Not available for 480V voltage option.
- 30 Not available with MD10N, MD30N, MD50N, MDPN and MDNL motion detector options.
- 31 A ground fault duplex receptacle (DRG or DRG IU) and a duplex USB receptacle (USB or USB IU) cannot be combined.
- 32 Only one receptacle can be specified per fixture, cannot be combined with motion detector option.
- 33 Not available with PB option.
- 34 The motion detector programming can be modified on site. A remote is required, order separately. See Remote section in the specification sheet for details.
- 35 Only one motion detector can be specified per fixture, cannot be combined with a receptacle.
- 36 MD10N, MD30N, MD50N and MDPN are Wattstopper motion detectors.
- 37 MDNL is an N-Light motion detector.
- 38 Consult factory for details.
- 39 Not available for 347V and 480V voltage options.
- 40 The motion detector is programmed in the factory, as per the settings requested at the time of the order.
- 41 Anchor bolts provided with double nuts, washers and template. One template provided for every 5 luminaires.
- 42 Available for N02, N03, N05, N07 and N10 bollard head outputs only.
- 43 Available for XS03, XS10, XS15, XS20 and XS25 column head outputs only.
- 44 Not available with type 5 distribution when head option is specified for the Lumenblade column.
- 45 Available with type 3 and type 5 distributions when a head option is specified for the Lumenblade column.
- 46 Available with type 2, type 3 and type 4 distributions when a bollard head is specified for the Lumenblade column.
- 47 Available for N03, N05, N07 and N10 bollard head outputs only.
- 48 Available with AMB head color temperature only.
- 49 Available with N02 output when a bollard head is specified. Available with XS03 output when a second column head is specified for the Lumenblade column.
- 50 Not available for FSL and HFSL lens.
- 51 Not available for FSL lens.