Lumenblade Medium
Agregar a su Selección:
Luminaria minimalista para el alumbrado público exterior
El Lumenblade Medium es una luminaria LED para exteriores que utiliza la tecnología de iluminación Lumencentro en forma recta para crear una línea de luz continua. Su diseño minimalista, discreto y distintivo, es duradero, se integra en la arquitectura contemporánea y patrimonial, ofrece un alto nivel de seguridad y se adapta al entorno. El Lumenblade Medium está disponible en varias longitudes, ofrece una amplia gama de flujos y distribuciones luminosas y proporciona una calidad de luz excepcional.
Características Expandir todo unfold_more Contraer todo unfold_less
Descargas
Documentos (0)
0.00/250 MB
Configurador de productos
Su código de producto
BLDM SD __ CSL __ __ __ __ __ __ __
Carcasa
Montaje
Voltaje
Ópticas 3
Flujo luminoso
Color y temperatura de color
Distribución
Acabado
Opción
Nota
- 1 Product code is for a single fixture only (S1E configuration). For double configuration (S2E), a second product code must be completed.
- 2 Not available with LT control option.
- 3 Consult factory for Softsite lens option. Available for 3000lm (1 board), 5000lm (2 boards), 7000lm (3 boards) and 10000lm (4 boards) outputs.
- 4 Motion detector options add 6 1/4 plg to total length of fixture.
- 5 Available up to 277V.
- 6 Nur für CRI 80 verfügbar.
- 7 Available for CRI 80 and CRI 90 only.
- 8 Not DarkSky Approved.
- 9 Available for CRI 70 and CRI 80 only.
- 10 Binning within a 3-step McAdam ellipse, with the exception of 5700K.
- 11 Binning within a 2-step MacAdam ellipse, with the exception of 2200K and 5700K.
- 12 Binning within a 2-step MacAdam ellipse.
- 13 Specify RAL number followed by “TX” for textured finish (ex: RAL9007TX) or STX for Sandtex finish (ex: RAL9007STX). Textured or Sandtex finishes are recommended for the durability of all products. If a finish is not specified with the RAL number (ex: RAL9007), a glossy finish will be provided. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 14 Setup charges apply for RAL colors. Consult factory for details.
- 15 Longer lead times can be expected for custom RAL color finishes.
- 16 DIM control can be used as NO (On/Off control) if no data is required.
- 17 Not available with SPR3, SPR3 SC, SPR5, SPR5 SC, SPR7 and SPR7 SC 3-Pin, 5-Pin, and 7-Pin receptacles options and MD10N, MD10W, MD30N, MD30W, MD50N, MD50W, MDPN and MDPW motion detector options.
- 18 Available with S40, S60, M80 and M100 output options only.
- 19 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 20 Setup charges apply. Consult factory for details.
- 21 Only one receptacle can be specified per fixture, cannot be combined with motion detector option.
- 22 The motion detector programming can be modified on site. A remote is required, order separately. See Remote section in the specification sheet for details.
- 23 Only one motion detector can be specified per fixture, cannot be combined with a receptacle.
- 24 The motion detector is programmed in the factory, as per the settings requested at the time of the order.
- 25 Consult Pole Mounting Adaptor section for standard available configurations.
Aplicaciones relacionadas
Productos relacionados
-
Lumenblade Small
DarkSky Approved -
Lumenblade Small Wall Mount Horizontal
DarkSky Approved Nuevo -
Lumenblade Small Wall Mount Perpendicular
DarkSky Approved Nuevo -
Straight Poles
-
Muffler Poles
-
Lumentech Pole
-
Lumenblade Column
DarkSky Approved -
Lumenblade Bollard
DarkSky Approved