Lumencore Recessed Nano Wallwash
Add to your Selection:
High-performance LED downlight for ceiling applications
The Lumencore Recessed Nano Wallwash is a high-performance LED downlight for wallwash applications. Available in an array of trims and finishes, outputs, color and renderings, these luminaires are here to outperform. The Lumencore Recessed Nano Wallwash possesses a previously unseen lifespan, is quick to install, and can be used with a number of different control options.
Downloads
Documents (0)
0.00/250 MBInstallation Instructions
Installation Instructions (RM Installation Type)PDFdownloadadd- Installation Instructions (NC installation type)PDFdownloadadd
- Installation Instructions (PC, IC, IC/AT installation types)PDFdownloadadd
- Installation Instructions (RMR Installation Type)PDFdownloadadd
- Installation Instructions - Bodine Emergency BatteryPDFdownloadadd
- Installation Instructions - Iota Emergency BatteryPDFdownloadadd
- Installation Instructions - Driver ReplacementPDFdownloadadd
Lumencore Installation VideosRelated Documents
Product Configurator
Your Product Code
LCRN A WA __ __ __ __ __ __ __ __ __ __ __ NA
Certification
Type
Optics (Nominal Distribution)
Control 6
Decorative Bezel
Decorative Bezel Finish
Trim 28
Trim Finish 28
Installation Type
Option
Accessories
Notes
- 1 Refer to website product configurator for all exceptions.
- 2 Not available for 700 lumens. Not available for 1000 lumens when combined with 80 color rendering option.
- 3 Available for CRI 80 only.
- 4 The color of the double asymmetric baffle is metallic gray.
- 5 The color of the asymmetric wallwash baffle matches the color specified for the decorative bezel.
- 6 Control options vary according to color temperature, color rendering, optics and installation type combination. Refer to website product configurator for details.
- 7 Manufacturer's choice driver. Order code may change to NO1.
- 8 Not available with 347V.
- 9 Manufacturer's choice driver. Order code may change to DAMC1 or DAMC2.
- 10 Driver cuts off power to the fixture when the control signal drops below 0.5V.
- 11 Manufacturer's choice driver. Order code may change to PH1 or PH2.
- 12 Available for 120V voltage option only.
- 13 Manufacturer's choice driver. Order code is subject to change.
- 14 Not available for 700 lumens.
- 15 Not available for DAS optic when combined with 1000 lumens.
- 16 One EcoSystem® address per fixture.
- 17 Configurable between 8 or 16-bit dimming control via RDM. DMX/RDM requires LumenID, LumenID software and onsite commissioning.
- 18 A Control Box (CBX-DS or CBX-ST) and lumenID (LID) must be specified.
- 19 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 20 1% minimum dimming value.
- 21 Available for IWW optic only.
- 22 Available for AWW and DAS optics only.
- 23 Available for WW optic only.
- 24 Coming soon, consult factory for details.
- 25 Not available for SB bezel.
- 26 Longer lead times can be expected for custom RAL color finishes.
- 27 Refer to Cylinder specification sheet and brochure for color options.
- 28 Not available for IWW optic when combined with IRB decorative bezel.
- 29 Cannot be combined with square ceiling cutout.
- 30 Cannot be combined with round ceiling cutout.
- 31 Remote distance is a maximum of 75 ft. For longer remote distances, please contact Lumenpulse Application Engineering Team for application validation.
- 32 Ceiling springs are field changeable, consult factory and installation instructions for details.
- 33 Available for RM and NC installation types only.
- 34 Emergency battery backup options require ceiling access for test button use. The battery will operate for 90 minutes minimum and maintain a minimum of 1 fc from a 7 ft 2 in height as per UL 924. For indoor use only in dry or damp locations.
- 35 Emergency battery backup options are field installed and not presided by Lumenpulse. Refer to related installation instructions for details.
- 36 Not available with LT control option.
Related Applications
Related Products
-
Lumencore Recessed Nano Downlight
Available in Wet IP54 New Features EZ Ship Ready -
Lumencore Recessed Nano Adjustable
New Features EZ Ship Ready -
Lumencore Recessed Nano Fixed Tilt
New Features -
Lumencore Recessed Nano Shower Rated
IP55 New Features -
Lumencore Recessed Nano Pinhole
New Features -
Lumencore Recessed Nano Title 24 JA8
Available in Wet IP54 -
Lumencore Recessed Small Downlight
Available in Wet IP54 New Features EZ Ship Ready -
Lumencore Recessed Small Adjustable
New Features EZ Ship Ready