Lumencore Recessed Nano Downlight
Add to your Selection:
High-performance LED downlight for ceiling applications
The Lumencore Recessed Nano Downlight is a high-performance LED downlight for ceiling applications. Available in an array of trims and finishes, outputs, optics, color renderings, accessories, and a WET IP54 option, these luminaires are here to outperform. The Lumencore Recessed Nano Downlight possesses a previously unseen lifespan, is quick to install, and can be used with a number of different control options.
Downloads
Documents (0)
0.00/250 MBInstallation Instructions
Installation Instructions (RM Installation Type)PDFdownloadadd- Installation Instructions (NC installation type)PDFdownloadadd
- Installation Instructions (PC, IC, IC/AT installation types)PDFdownloadadd
- Installation Instructions (RMR Installation Type)PDFdownloadadd
- Installation Instructions - Bodine Emergency BatteryPDFdownloadadd
- Installation Instructions - Iota Emergency BatteryPDFdownloadadd
- Installation Instructions - Driver ReplacementPDFdownloadadd
Lumencore Installation VideosRelated Documents
Product Configurator
Your Product Code
LCRN __ FD __ __ __ __ __ __ __ __ __ __ __ __
EZ Ship
Type
Color and Color Temperature
Optics (Nominal Distribution)
Control 23
Decorative Bezel Finish
Trim 48
Trim Finish
Installation Type
Option
Accessories 63(0/2)
Notes
- 1 Refer to website product configurator for all exceptions.
- 2 Refer to website for EZ Ship configurations.
- 3 Refer to website for ENERGY STAR certified product configurations.
- 4 Not available for 700 lumens. Not available for 1000 lumens when combined with 80 color rendering option.
- 5 Not available for XN and VN optics.
- 6 Not available for DTW, DTWP, DWH, DWW or DWWP color options.
- 7 Not available for ENERGY STAR certification.
- 8 For ENERGY STAR certification, not available with RM or NC installation types when combined with 90 color rendering option.
- 9 Available for M, MFR, W, WFR, VW and VWFR optics only.
- 10 Not available with PC, IC, IC/AT or RMR installation types.
- 11 Available for CRI 80 only.
- 12 Compatible with all control options except for DALIT8.
- 13 Available for 1000 and 1300 lumens when combined with 90 color rendering option and MFR, W, WFR, VW or VWFR optics only.
- 14 MFR, WFR and VWFR faceted reflector optics are recommended for optimal performance.
- 15 Compatible with DA1, SDALI1, SDALI2, DMX/RDM and LT control options only.
- 16 Available for 1300 lumens when combined with 80 color rendering option and MFR, W, WFR, VW or VWFR optics only.
- 17 Compatible with LT, DMX/RDM and DALIT8 control options only.
- 18 Available for 700 lumens when combined with 80 or 90 color rendering options and 27K, 30K, 35K or 40K color temperature options only.
- 19 Available up to 1300 lumens when combined with 80 or 90 color rendering options and 27K, 30K, 35K or 40K color temperature options only.
- 20 Available up to 1300 lumens when combined with 80, 90 or 95 color rendering options only.
- 21 Available up to 2000 lumens when combined with 80 color rendering option and up to 1300 lumens when combined with 80, 90 or 95 color rendering options only.
- 22 Available up to 3000 lumens when combined with 80 color rendering option and up to 2000 lumens when combined with 80, 90 or 95 color rendering options only.
- 23 Control options vary according to color temperature, color rendering, optics and installation type combination. Refer to website product configurator for details.
- 24 Manufacturer's choice driver. Order code may change to NO1.
- 25 Not available with 347V.
- 26 Not available for 3000 lumens.
- 27 Manufacturer's choice driver. Order code may change to DAMC1 or DAMC2.
- 28 Driver cuts off power to the fixture when the control signal drops below 0.5V.
- 29 Manufacturer's choice driver. Order code may change to PH1 or PH2.
- 30 Available for 120V voltage option only.
- 31 Manufacturer's choice driver. Order code is subject to change.
- 32 Not available for 700 lumens.
- 33 Not available for M, MFR, W, WFR, VW and VWFR optics when combined with 1000 lumens.
- 34 One EcoSystem® address per fixture. Lutron® EcoSystem® Enabled dimming not available for 1300 lumens combined with VN optic. Available for static white color temperatures only.
- 35 Available for DWH, DWW and DWWP color options only. DALI-2 Type 8 controller required.
- 36 Not available for PC, IC or IC/AT installation types.
- 37 Configurable between 8 or 16-bit dimming control via RDM. DMX/RDM requires LumenID, LumenID software and onsite commissioning.
- 38 A Control Box (CBX-DS or CBX-ST) and lumenID (LID) must be specified.
- 39 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 40 1% minimum dimming value.
- 41 For ENERGY STAR certification, not available with MB, DB and DR decorative bezels when combined with RM or NC installation types or PC, IC and IC/AT installation types when combined with 90 color rendering option.
- 42 For ENERGY STAR certification, not available with MB, DB and DR decorative bezels when combined with RM or NC installation types.
- 43 For ENERGY STAR certification, not available with MB, DB and DR decorative bezels.
- 44 Coming soon, consult factory for details.
- 45 Available with DB and DR Bezels only.
- 46 Longer lead times can be expected for custom RAL color finishes.
- 47 Refer to Cylinder specification sheet and brochure for color options.
- 48 Not applicable to DR bezel option.
- 49 Cannot be combined with square ceiling cutout.
- 50 Cannot be combined with round ceiling cutout.
- 51 Available for 700 lumens when combined with XN optic and up to 1300 lumens when combined with VN, NS and N optics. Available up to 2000 lumens when combined with NFR optic and up to 3000 lumens when combined with M, MFR, W, WFR, VW and VWFR optics. Refer to optic option notes for color rendering limitations.
- 52 Available for 700 lumens when combined with XN optic and up to 1300 lumens when combined with VN, NS, N and NFR optics. Available up to 2000 lumens when combined 80 color rendering option and M, MFR, W, WFR, VW and VWFR optics. Refer to optic option notes for color rendering limitations.
- 53 Not available for DWH, DWW or DWWP color options.
- 54 Remote distance is a maximum of 75 ft. For longer remote distances, please contact Lumenpulse Application Engineering Team for application validation.
- 55 Ceiling springs are field changeable, consult factory and installation instructions for details.
- 56 IP54 rating only if installation is interior covered recessed ceiling-mounted or exterior canopy-mounted.
- 57 DR bezel is recommended for outdoor canopy installations.
- 58 A CL, SL or PD must be specified to maintain an IP54 rating. A second accessory may be specified.
- 59 For ENERGY STAR certification, not available with RM or NC installation types when combined with 90 color rendering option combined and 2000 lumens.
- 60 Available for RM and NC installation types only.
- 61 Emergency battery backup options are field installed and not presided by Lumenpulse. Refer to related installation instructions for details.
- 62 Emergency battery backup options require ceiling access for test button use. The battery will operate for 90 minutes minimum and maintain a minimum of 1 fc from a 7 ft 2 in height as per UL 924. For indoor use only in dry or damp locations.
- 63 Maximum two accessories per fixture.
- 64 Not available for DTW and DTWP color options.
- 65 Available for XN, VN and NS optics only.
- 66 Can be combined with PD accessory only.
- 67 Recommended to be combined with HL or XLVR accessory only.
- 68 Recommended for XN, VN, NS, N and NFR optics when combined with 2200K, 2700K, 3000K, 3500K, 4000K color temperature options. Nominal 10° x 40° distribution when used with the NS optic. Recommended for MFR optic when combined with DTW, DTWP, DWH, DWW or DWWP color options only.
- 69 For optimal performance, it is not recommended to mix with other accessories.
- 70 Recommended for XN, VN, NS, N and NFR optics when combined with 2200K, 2700K, 3000K, 3500K, 4000K color temperature options only. Nominal 10° x 60° distribution when used with the NS optic. Recommended for MFR optic when combined with DTW, DTWP, DWH, DWW or DWWP color options only.
Related Applications
Related Products
-
Lumencore Recessed Nano Adjustable
New Features EZ Ship Ready -
Lumencore Recessed Nano Wallwash
New Features With Invisio Wallwash -
Lumencore Recessed Nano Fixed Tilt
New Features -
Lumencore Recessed Nano Shower Rated
IP55 New Features -
Lumencore Recessed Nano Pinhole
New Features -
Lumencore Recessed Nano Title 24 JA8
Available in Wet IP54 -
Lumencore Recessed Small Downlight
Available in Wet IP54 New Features EZ Ship Ready -
Lumencore Recessed Small Adjustable
New Features EZ Ship Ready