Lumencore Recessed Nano Pinhole
High-performance LED downlight for ceiling applications
The Lumencore Recessed Nano Pinhole is a high-performance LED downlight for ceiling applications. Available in an array of trims and finishes, outputs, optics, color renderings, and accessories, these luminaires are here to outperform. The Lumencore Recessed Nano Pinhole possesses a previously unseen lifespan, is quick to install, and can be used with a number of different control options.
Options Expand All unfold_more Collapse All unfold_less
On/Off Control
1-10V Dimming 1% Linear
1-10V Dimming 1% Logarithmic
Standard DALI Dimming, 1% Linear
Standard DALI Dimming, 1% Logarithmic
Pro DALI Dimming 0.1% Linear
Pro DALI Dimming 0.1% Logarithmic
DALI dimming Type 8 (multi channel capability)
DMX/RDM (Configurable to 1, 2, or 3 Channel Control via RDM in the Field)
Matte White
Matte Black
Nickel Satin
Custom Color Trim (Specify 4-Digit RAL K7 Color)
Special color (choose from color palette in complete specification sheet)
2200K
2700K
3000K
3500K
4000K
Dim to Warm Plus (3500K to 1800K)
Dynamic White (2700K to 6500K)
Dynamic Warm White Plus (2200K to 3500K)
Extra Narrow Spot Distribution 5°
Very Narrow Spot Distribution 10°
Narrow Spot Distribution 15°
Narrow Distribution 25°
Narrow Faceted Reflector 25°
Medium Reflector 40°
Medium Faceted Reflector 40°
Wide Reflector 60°
Wide Faceted Reflector 60°
Very Wide Reflector 80°
Very Wide Faceted Reflector 80°
Honeycomb Louver
Concentric Ring Louver
Clear Glass Lens
Softening Glass Lens
Prismatic Diffuser
Linear Spread Lens Narrow (1° x 40°)
Linear Spread Lens Wide (1° x 60°)
Beam Widening Lens (+10°)
Beam Widening Lens (+20°)
Beam Widening Lens (+30°)
Downloads
Documents (0)
0.00/250 MBBrochures
Point Source CataloguePDFdownloadadd
Installation Instructions
Installation InstructionsPDFdownloadadd
Lumencore Installation VideosCertifications
CE Declaration of ConformityPDFdownloadadd
Product Configurator
Your Product Code
LCRN B P 220/240 __ __ __ __ __ __ PB MBK __ __ __ __
Certification
Type
Voltage
Color and Color Temperature
Optics (Nominal Distribution)
Control 16
Decorative Bezel
Decorative Bezel Finish
Trim Finish
Accessories 25(0/2)
- 1 Refer to website product configurator for all exceptions.
- 2 Available for M, MFR, W, WFR, VW and VWFR optics only.
- 3 Available for CRI 80 only.
- 4 Compatible with all control options except for DALIT8 and DMX/RDM.
- 5 Compatible with DA1, SDALI1, SDALI2 and DMX/RDM control options only.
- 6 MFR, WFR and VWFR faceted reflector optics are recommended for optimal performance.
- 7 Available for 1000 and 1300 lumens when combined with 90 color rendering option and MFR, W, WFR, VW or VWFR optics only.
- 8 Compatible with DALIT8 and DMX/RDM control options only.
- 9 Available for 1300 lumens when combined with 80 color rendering option and MFR, W, WFR, VW or VWFR optics only.
- 10 Available for 700 lumens when combined with 80 or 90 color rendering options and 27K, 30K, 35K or 40K color temperature options only.
- 11 Available up to 1300 lumens when combined with 80 or 90 color rendering options and 27K, 30K, 35K or 40K color temperature options only.
- 12 Available up to 1300 lumens when combined with 80, 90 or 95 color rendering options only.
- 13 Available up to 2000 lumens when combined with 80 color rendering option and up to 1300 lumens when combined with 80, 90 or 95 color rendering options only.
- 14 Available up to 3000 lumens when combined with 80 color rendering option and up to 2000 lumens when combined with 80, 90 or 95 color rendering options only.
- 15 Beam angle will be affected by the Pinhole bezel. Consult factory for details.
- 16 Control options vary according to color temperature, color rendering, optics and installation type combination. Refer to website product configurator for details.
- 17 Available for DWH and DWWP colour options only. DALI-2 Type 8 controller required.
- 18 Available for DTWP, DWH and DWWP color options only.
- 19 Configurable between 8 or 16-bit dimming control via RDM. DMX/RDM requires LumenID, LumenID software and onsite commissioning.
- 20 A Control Box (CBX-DS or CBX-ST) and lumenID (LID) must be specified.
- 21 Cannot be combined with square ceiling cutout.
- 22 Cannot be combined with round ceiling cutout.
- 23 Longer lead times can be expected for custom RAL color finishes.
- 24 Please specify colour from special colour palette on Lumencore specification sheets.
- 25 Maximum two accessories per fixture.
- 26 Not available for DTWP colour option.
- 27 Available for XN, VN and NS optics only.
- 28 Can be combined with PD accessory only.
- 29 Recommended to be combined with HL or XLVR accessory only.
- 30 Recommended for XN, VN, NS, N and NFR optics when combined with 2200K, 2700K, 3000K, 3500K, 4000K colour temperature options. Nominal 10° x 40° distribution when used with the NS optic. Recommended for MFR optic when combined with DTWP, DWH or DWWP colour options only.
- 31 For optimal performance, it is not recommended to mix with other accessories.
- 32 Recommended for XN, VN, NS, N and NFR optics when combined with 2200K, 2700K, 3000K, 3500K, 4000K colour temperature options only. Nominal 10° x 60° distribution when used with the NS optic. Recommended for MFR optic when combined with DTWP, DWH or DWWP colour options only.
Related Applications
Related Products
-
Lumencore Recessed Nano Downlight
Available in Wet IP54 New Features -
Lumencore Recessed Nano Adjustable
New Features -
Lumencore Recessed Nano Wallwash
New Features With Invisio Wallwash -
Lumencore Recessed Nano Fixed Tilt
New Features -
Lumencore Recessed Nano Shower Rated
IP55 New Features -
Lumencore Recessed Small Downlight
Available in Wet IP54 New Features -
Lumencore Recessed Small Adjustable
New Features -
Lumencore Recessed Small Wallwash
New Features With Invisio Wallwash