Lumenfacade Inground Color Changing
Add to your Selection:
Linear ground-recessed lighting, in color
The Lumenfacade Inground Colour Changing is a high-performance linear LED luminaire designed for colourful asymmetric wall washing, grazing, and linear wayfinding. The Lumenfacade Inground Colour Changing is available in four different sizes (12 in, 24 in, 36 in or 48 in), with a wide number of options, including a choice of optics; RGB, RGBW or RGBA colour mixing; controls; as well as Legacy or Custom output modes.
Videos
Downloads
Documents (0)
0.00/250 MB
Product Configurator
Your Product Code
LOI 120/277 __ __ __ __ __
Housing 1 2 3
Voltage
Length
Color and Color Temperature
Optic
Optical Option
Notes
- 1 A Lumenfacade Inground fixture includes one optical chamber (LOIC), one power and control box (PACBOX) and one recessed blockout (RBO). The LOIC, PACBOX and RBO are provided according to the output/color, length and control configuration.
- 2 Consult the installation instructions to plan all aspects of the fixture installation.
- 3 Power consumption is typically 20% higher for 12 in fixture lengths.
- 4 Consult factory for products that are BAA-approved (Buy America.n Act).
- 5 2700K, 3500K and Royal Blue available, consult factory. Longer lead times apply.
- 6 8x8, 10x10, 10x30, 10x60, 10x90, 15x25 and WW distributions come with a half-frosted lens to bring light low on the wall for grazing applications. Clear lens also available, consult factory.
- 7 For best results, we recommend a 6 in setback from surface. Contact factory for application support.
- 8 Do not specify a tilt setting for the asymmetric wallwash option. The asymmetric wallwash optic is factory set with a 2.5 degree tilt.
- 9 Tilt setting is factory set and cannot be adjusted in the field.
- 10 The addition of an internal louver will affect beam distribution. Consult factory for application support.
- 11 A Lumentranslator 2 (LTL2) and LumentalkID (LIDLT) must be specified for Lumentalk applications. Consult Lumentranslator 2 and Lumentalk pages and specification sheets for details.
- 12 A control box (CBX) and LumenID (LID) must be specified.
- 13 DALI 2 T8 controller required, provided by others. DALI2 T8 control uses a single DALI short address.
- 14 Consult European specification sheet and installation instructions for CE wiring information.
Related Projects
-
July Column
-
Calgary Historic City Hall
-
Espace 67, Jean-Drapeau Park
-
Beacon Park Treehouse
-
Genoa Park Amphitheatre
-
Compton Verney
-
Petersen Automotive Museum