Lumenblade Bollard
Luminaria minimalista para iluminación pública exterior
Lumenblade Bollard es una luminaria LED para exteriores que utiliza una version rectilínea de la tecnología de iluminación Lumencentro para crear una luz continua. Sus opciones incluyen: alturas de 2 o 3 pies, con cabezal doble o sencillo. Su diseño discreto, distintivo y minimalista, es duradero y se integra tanto en la arquitectura contemporánea como patrimonial, ofrece un alto nivel de seguridad y se adapta al entorno con flujos bajos, además, cuenta con una clasificación BUG de 0.
Opciones Expandir todo unfold_more Contraer todo unfold_less
200lm (4 LEDs)
300lm (4 LEDs)
500lm (4 LEDs)
700lm (4 LEDs)
1000lm (4 LEDs)
Negro Sandtext
Bronce Sandtext
Plateado Sandtex
Negro texturizado
Bronce texturizado, no metálico
Gris intermedio texturizado
Verde texturizado
Blanco texturizado
Colores y acabados personalizados
Amber
2200K
2700K
3000K
3500K
4000K
5700K
Type II
Type II Backlight Shield
Type III
Type III Backlight Shield
Type IV
Type IV Backlight Shield
Tipo V
Type V Square
Descargas
Documentos (0)
0.00/250 MB
Configurador de productos
Su código de producto
BLDB __ __ __
Carcasa
Flujo luminoso 7
Color y temperatura de color
Distribución
Opción óptica
Acabado
Opción
Anchor Bolts Option
Head Option
Head Output
Head Color and Color Temperature
Head Distributions
Head Optical Option
- 1 A ground fault duplex receptacle (DRG or DRG IU) and a duplex USB receptacle (USB or USB IU) cannot be combined with TM2 mounting.
- 2 Standard IK06 rating for glass lens. IK10 rated polycarbonate lens available, please consult factory.
- 3 Not available with type 5 distribution.
- 4 Available with type 3 and 5 distributions only.
- 5 Available with Type 2, 3 and 4 distributions only.
- 6 Available for N03, N05, N07 and N10 outputs only.
- 7 Lumen output will vary according to the lens and distribution specified for the fixture. Please consult the photometric information section of the specification sheet for more details.
- 8 Available with AMB color temperature only.
- 9 Not available for FSL and HFSL lens.
- 10 Available with N02 output only.
- 11 Nur für CRI 80 verfügbar.
- 12 Available for CRI 80 and CRI 90 only.
- 13 Not DarkSky Approved.
- 14 Available for CRI 70 and CRI 80 only.
- 15 Binning within a 3-step McAdam ellipse, with the exception of 5700K.
- 16 Binning within a 2-step MacAdam ellipse, with the exception of 2200K and 5700K.
- 17 Binning within a 2-step MacAdam ellipse.
- 18 Available with CSL and HFSL lenses only.
- 19 Factory installed.
- 20 Specify RAL number followed by “TX” for textured finish (ex: RAL9007TX) or STX for Sandtex finish (ex: RAL9007STX). Textured or Sandtex finishes are recommended for the durability of all products. If a finish is not specified with the RAL number (ex: RAL9007), a glossy finish will be provided. Please consult factory for other RAL textures and glosses, or to match alternate color charts. Final color matching results may vary.
- 21 Setup charges apply for RAL colors. Consult factory for details.
- 22 Longer lead times can be expected for custom RAL color finishes.
- 23 DIM control can be used as NO (On/Off control) if no data is required.
- 24 Not available with PB option.
- 25 When combined with 2 pies height option, Lumentalk cannot be combined with a ground fault duplex receptacle (DRG or DRG IU) or a duplex USB receptacle (USB or USB IU).
- 26 Vibration tested in accordance with ANSI 136.31 2018 for bridge and overpass applications at 5Gv.
- 27 Specify only if a bridge or overpass application is required.
- 28 Use only when exposed to salt spray. This option is not required for normal outdoor exposure.
- 29 Setup charges apply. Consult factory for details.
- 30 Not available with LT control option.
- 31 Not available for 480V voltage option.
- 32 A ground fault duplex receptacle (DRG or DRG IU) and a duplex USB receptacle (USB or USB IU) cannot be combined.
- 33 Anchor bolts provided with double nuts, washers and template. One template provided for every 5 luminaires.